Löschen abgebrochener Uploads

[NickTheRipper]

Ich möchte ganz gerne, daß abgebrochene Downloads automatisch wieder vom Server gelöscht werden, aber es will nicht so recht funktionieren.

Ich habe in der proftpd.conf den Befehl "DeleteAbortedStores on" verwendet und diesen an mehreren Stellen versucht einzubinden, aber vergebens. Der Server selber läuft als "inetd".

Ich ließ ProFTD auch im Debugmodus laufen und werden die abgebrochenen Uploads als erfolgreicher Upload angezeigt.

Ich erstellte zuerst ein Verzeichnis "test" und simulierte dann einen abgebrochenen Upload, indem ich die Datei "testdatei" auf den Server schob und den Upload dann selber abgebrochen habe.

Hier die Debugausgabe:

Code:

connect from 192.168.0.20 (192.168.0.20)
parsing '/etc/proftpd.conf' configuration
<Directory />: adding section for resolved path '/'
<Directory /upload>: adding section for resolved path '/upload'
<Directory /download>: adding section for resolved path '/download'
<Directory >: adding section for resolved path ''
192.168.0.1 -  
192.168.0.1 - Config for NxB-[Clan]:
192.168.0.1 - /
192.168.0.1 -  AllowOverwrite
192.168.0.1 -  Umask
192.168.0.1 -  TransferLog
192.168.0.1 -  RootLogin
192.168.0.1 -  DeleteAbortedStores
192.168.0.1 -  MaxClientsPerHost
192.168.0.1 -  DirFakeMode
192.168.0.1 -  RequireValidShell
192.168.0.1 - DefaultServer
192.168.0.1 - TimeoutIdle
192.168.0.1 - TimeoutStalled
192.168.0.1 - TimeoutLogin
192.168.0.1 - TimeoutNoTransfer
192.168.0.1 - AuthPAM
192.168.0.1 - AuthPAMAuthoritative
192.168.0.1 - Umask
192.168.0.1 - UserID
192.168.0.1 - UserName
192.168.0.1 - GroupID
192.168.0.1 - GroupName
192.168.0.1 - DefaultRoot
192.168.0.1 - TransferLog
192.168.0.1 - ExtendedLog
192.168.0.1 - ExtendedLog
192.168.0.1 - RootLogin
192.168.0.1 - IdentLookups
192.168.0.1 - DeleteAbortedStores
192.168.0.1 - RootLogin
192.168.0.1 - MaxLoginAttempts
192.168.0.1 - MaxClientsPerHost
192.168.0.1 - DirFakeMode
192.168.0.1 - RootLogin
192.168.0.1 - RequireValidShell
192.168.0.1 -  
192.168.0.1 - Config for NxB-[Clan]:
192.168.0.1 -  
192.168.0.1 -  /upload
192.168.0.1 -   Limit
192.168.0.1 -    DenyAll
192.168.0.1 -   Limit
192.168.0.1 -    AllowAll
192.168.0.1 -   GroupOwner
192.168.0.1 -   DeleteAbortedStores
192.168.0.1 -   AllowOverwrite
192.168.0.1 -   Umask
192.168.0.1 -   DirFakeMode
192.168.0.1 -   MaxClientsPerHost
192.168.0.1 -   MaxClients
192.168.0.1 -   DisplayLogin
192.168.0.1 -   DisplayFirstChdir
192.168.0.1 -   TransferLog
192.168.0.1 -   RootLogin
192.168.0.1 -   RequireValidShell
192.168.0.1 -  /download
192.168.0.1 -   Limit
192.168.0.1 -    DenyAll
192.168.0.1 -   AllowOverwrite
192.168.0.1 -   Umask
192.168.0.1 -   DirFakeMode
192.168.0.1 -   MaxClientsPerHost
192.168.0.1 -   MaxClients
192.168.0.1 -   DisplayLogin
192.168.0.1 -   DisplayFirstChdir
192.168.0.1 -   TransferLog
192.168.0.1 -   RootLogin
192.168.0.1 -   DeleteAbortedStores
192.168.0.1 -   RequireValidShell
192.168.0.1 -  Limit
192.168.0.1 -   DenyAll
192.168.0.1 -  AllowOverwrite
192.168.0.1 -  Umask
192.168.0.1 -  DirFakeMode
192.168.0.1 -  MaxClientsPerHost
192.168.0.1 -  MaxClients
192.168.0.1 -  DisplayLogin
192.168.0.1 -  DisplayFirstChdir
192.168.0.1 -  TransferLog
192.168.0.1 -  RootLogin
192.168.0.1 -  DeleteAbortedStores
192.168.0.1 -  RequireValidShell
192.168.0.1 - Limit
192.168.0.1 -  DenyGroup
192.168.0.1 - DefaultRoot
192.168.0.1 - AllowOverwrite
192.168.0.1 - AuthPAM
192.168.0.1 - AuthPAMAuthoritative
192.168.0.1 - Umask
192.168.0.1 - DirFakeMode
192.168.0.1 - MaxClientsPerHost
192.168.0.1 - MaxClients
192.168.0.1 - MaxLoginAttempts
192.168.0.1 - DisplayLogin
192.168.0.1 - DisplayFirstChdir
192.168.0.1 - TransferLog
192.168.0.1 - ExtendedLog
192.168.0.1 - ExtendedLog
192.168.0.1 - RootLogin
192.168.0.1 - DeleteAbortedStores
192.168.0.1 - RootLogin
192.168.0.1 - MaxLoginAttempts
192.168.0.1 - MaxClientsPerHost
192.168.0.1 - DirFakeMode
192.168.0.1 - RootLogin
192.168.0.1 - RequireValidShell
192.168.0.1 - error converting stdin to IPv6 socket: Protocol not available
213.23.130.223 (192.168.0.20[192.168.0.20]) - connected - local  : 213.23.130.223:21
213.23.130.223 (192.168.0.20[192.168.0.20]) - connected - remote : 192.168.0.20:4687
213.23.130.223 (192.168.0.20[192.168.0.20]) - FTP session opened.
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'USER xxxxxx' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'USER xxxxxx' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'USER xxxxxx' to mod_auth
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'USER xxxxxx' to mod_auth
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'USER xxxxxx' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PASS (hidden)' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PASS (hidden)' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PASS (hidden)' to mod_auth
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'PASS (hidden)' to mod_auth
PAM-warn[5009]: service: ftp [on terminal: <unknown>]
PAM-warn[5009]: user: (uid=0) -> xxxxxx [remote: ?nobody@192.168.0.20]
PAM-warn[5009]: service: ftp [on terminal: <unknown>]
PAM-warn[5009]: user: (uid=0) -> xxxxxx [remote: ?nobody@192.168.0.20]
PAM-warn[5009]: service: ftp [on terminal: <unknown>]
PAM-warn[5009]: user: (uid=0) -> xxxxxx [remote: ?nobody@192.168.0.20]
PAM-unix2[5009]: session started for user xxxxxx, service ftp
213.23.130.223 (192.168.0.20[192.168.0.20]) -  
213.23.130.223 (192.168.0.20[192.168.0.20]) - Config for NxB-[Clan]:
213.23.130.223 (192.168.0.20[192.168.0.20]) -  
213.23.130.223 (192.168.0.20[192.168.0.20]) -  /upload
213.23.130.223 (192.168.0.20[192.168.0.20]) -   Limit
213.23.130.223 (192.168.0.20[192.168.0.20]) -    DenyAll
213.23.130.223 (192.168.0.20[192.168.0.20]) -   Limit
213.23.130.223 (192.168.0.20[192.168.0.20]) -    AllowAll
213.23.130.223 (192.168.0.20[192.168.0.20]) -   GroupOwner
213.23.130.223 (192.168.0.20[192.168.0.20]) -   DeleteAbortedStores
213.23.130.223 (192.168.0.20[192.168.0.20]) -   AllowOverwrite
213.23.130.223 (192.168.0.20[192.168.0.20]) -   Umask
213.23.130.223 (192.168.0.20[192.168.0.20]) -   DirFakeMode
213.23.130.223 (192.168.0.20[192.168.0.20]) -   MaxClientsPerHost
213.23.130.223 (192.168.0.20[192.168.0.20]) -   MaxClients
213.23.130.223 (192.168.0.20[192.168.0.20]) -   DisplayLogin
213.23.130.223 (192.168.0.20[192.168.0.20]) -   DisplayFirstChdir
213.23.130.223 (192.168.0.20[192.168.0.20]) -   TransferLog
213.23.130.223 (192.168.0.20[192.168.0.20]) -   RootLogin
213.23.130.223 (192.168.0.20[192.168.0.20]) -   RequireValidShell
213.23.130.223 (192.168.0.20[192.168.0.20]) -  /download
213.23.130.223 (192.168.0.20[192.168.0.20]) -   Limit
213.23.130.223 (192.168.0.20[192.168.0.20]) -    DenyAll
213.23.130.223 (192.168.0.20[192.168.0.20]) -   AllowOverwrite
213.23.130.223 (192.168.0.20[192.168.0.20]) -   Umask
213.23.130.223 (192.168.0.20[192.168.0.20]) -   DirFakeMode
213.23.130.223 (192.168.0.20[192.168.0.20]) -   MaxClientsPerHost
213.23.130.223 (192.168.0.20[192.168.0.20]) -   MaxClients
213.23.130.223 (192.168.0.20[192.168.0.20]) -   DisplayLogin
213.23.130.223 (192.168.0.20[192.168.0.20]) -   DisplayFirstChdir
213.23.130.223 (192.168.0.20[192.168.0.20]) -   TransferLog
213.23.130.223 (192.168.0.20[192.168.0.20]) -   RootLogin
213.23.130.223 (192.168.0.20[192.168.0.20]) -   DeleteAbortedStores
213.23.130.223 (192.168.0.20[192.168.0.20]) -   RequireValidShell
213.23.130.223 (192.168.0.20[192.168.0.20]) -  Limit
213.23.130.223 (192.168.0.20[192.168.0.20]) -   DenyAll
213.23.130.223 (192.168.0.20[192.168.0.20]) -  AllowOverwrite
213.23.130.223 (192.168.0.20[192.168.0.20]) -  Umask
213.23.130.223 (192.168.0.20[192.168.0.20]) -  DirFakeMode
213.23.130.223 (192.168.0.20[192.168.0.20]) -  MaxClientsPerHost
213.23.130.223 (192.168.0.20[192.168.0.20]) -  MaxClients
213.23.130.223 (192.168.0.20[192.168.0.20]) -  DisplayLogin
213.23.130.223 (192.168.0.20[192.168.0.20]) -  DisplayFirstChdir
213.23.130.223 (192.168.0.20[192.168.0.20]) -  TransferLog
213.23.130.223 (192.168.0.20[192.168.0.20]) -  RootLogin
213.23.130.223 (192.168.0.20[192.168.0.20]) -  DeleteAbortedStores
213.23.130.223 (192.168.0.20[192.168.0.20]) -  RequireValidShell
213.23.130.223 (192.168.0.20[192.168.0.20]) - Limit
213.23.130.223 (192.168.0.20[192.168.0.20]) -  DenyGroup
213.23.130.223 (192.168.0.20[192.168.0.20]) - DefaultRoot
213.23.130.223 (192.168.0.20[192.168.0.20]) - AllowOverwrite
213.23.130.223 (192.168.0.20[192.168.0.20]) - AuthPAM
213.23.130.223 (192.168.0.20[192.168.0.20]) - AuthPAMAuthoritative
213.23.130.223 (192.168.0.20[192.168.0.20]) - Umask
213.23.130.223 (192.168.0.20[192.168.0.20]) - DirFakeMode
213.23.130.223 (192.168.0.20[192.168.0.20]) - MaxClientsPerHost
213.23.130.223 (192.168.0.20[192.168.0.20]) - MaxClients
213.23.130.223 (192.168.0.20[192.168.0.20]) - MaxLoginAttempts
213.23.130.223 (192.168.0.20[192.168.0.20]) - DisplayLogin
213.23.130.223 (192.168.0.20[192.168.0.20]) - DisplayFirstChdir
213.23.130.223 (192.168.0.20[192.168.0.20]) - TransferLog
213.23.130.223 (192.168.0.20[192.168.0.20]) - ExtendedLog
213.23.130.223 (192.168.0.20[192.168.0.20]) - ExtendedLog
213.23.130.223 (192.168.0.20[192.168.0.20]) - RootLogin
213.23.130.223 (192.168.0.20[192.168.0.20]) - DeleteAbortedStores
213.23.130.223 (192.168.0.20[192.168.0.20]) - RootLogin
213.23.130.223 (192.168.0.20[192.168.0.20]) - MaxLoginAttempts
213.23.130.223 (192.168.0.20[192.168.0.20]) - MaxClientsPerHost
213.23.130.223 (192.168.0.20[192.168.0.20]) - DirFakeMode
213.23.130.223 (192.168.0.20[192.168.0.20]) - RootLogin
213.23.130.223 (192.168.0.20[192.168.0.20]) - RequireValidShell
213.23.130.223 (192.168.0.20[192.168.0.20]) - CURRENT-CLIENTS
213.23.130.223 (192.168.0.20[192.168.0.20]) - USER
213.23.130.223 (192.168.0.20[192.168.0.20]) - USER xxxxxx: Login successful.
213.23.130.223 (192.168.0.20[192.168.0.20]) - Preparing to chroot() the environment, path = ''
213.23.130.223 (192.168.0.20[192.168.0.20]) - Environment successfully chroot()ed.
213.23.130.223 (192.168.0.20[192.168.0.20]) - unable to chdir to /xxxxxx (No such file or directory), defaulting to chroot directory  
213.23.130.223 (192.168.0.20[192.168.0.20]) - in dir_check_full(): path = '/', fullpath = '/'.
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching POST_CMD command 'PASS (hidden)' to mod_cap
213.23.130.223 (192.168.0.20[192.168.0.20]) - mod_cap/1.0: capabilities '= cap_chown,cap_net_bind_service+ep'
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching POST_CMD command 'PASS (hidden)' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching POST_CMD command 'PASS (hidden)' to mod_ls
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching POST_CMD command 'PASS (hidden)' to mod_auth
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'PASS (hidden)' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'PASS (hidden)' to mod_auth
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'SYST' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'SYST' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'SYST' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'SYST' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'FEAT' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'FEAT' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'FEAT' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'FEAT' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'CWD /' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'CWD /' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'CWD /' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - in dir_check_full(): path = '/', fullpath = '/'.
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'CWD /' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PWD' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PWD' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'PWD' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'PWD' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'TYPE A' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'TYPE A' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'TYPE A' to mod_xfer
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'TYPE A' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - Entering Passive Mode (213,23,130,223,17,37).
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'PASV' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'LIST' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'LIST' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'LIST' to mod_ls
213.23.130.223 (192.168.0.20[192.168.0.20]) - passive data connection opened - local  : 213.23.130.223:4389
213.23.130.223 (192.168.0.20[192.168.0.20]) - passive data connection opened - remote : 192.168.0.20:4688
213.23.130.223 (192.168.0.20[192.168.0.20]) - in dir_check_full(): path = '/upload', fullpath = '/upload'.
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'LIST' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'LIST' to mod_ls
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'CWD upload' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'CWD upload' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'CWD upload' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - in dir_check_full(): path = '/upload', fullpath = '/upload'.
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'CWD upload' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PWD' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PWD' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'PWD' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'PWD' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - Entering Passive Mode (213,23,130,223,17,38).
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'PASV' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'LIST' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'LIST' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'LIST' to mod_ls
213.23.130.223 (192.168.0.20[192.168.0.20]) - passive data connection opened - local  : 213.23.130.223:4390
213.23.130.223 (192.168.0.20[192.168.0.20]) - passive data connection opened - remote : 192.168.0.20:1031
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'LIST' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'LIST' to mod_ls
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'MKD test' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'MKD test' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'MKD test' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - in dir_check(): setting umask to 0002 (was 0002)
213.23.130.223 (192.168.0.20[192.168.0.20]) - chown(/upload/test) to gid 101 successful
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'MKD test' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - Entering Passive Mode (213,23,130,223,17,39).
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'PASV' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'LIST' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'LIST' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'LIST' to mod_ls
213.23.130.223 (192.168.0.20[192.168.0.20]) - passive data connection opened - local  : 213.23.130.223:4391
213.23.130.223 (192.168.0.20[192.168.0.20]) - passive data connection opened - remote : 192.168.0.20:1074
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'LIST' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'LIST' to mod_ls
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'CWD test' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'CWD test' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'CWD test' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - in dir_check_full(): path = '/upload/test', fullpath = '/upload/test'.
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'CWD test' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PWD' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PWD' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'PWD' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'PWD' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - Entering Passive Mode (213,23,130,223,17,40).
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'PASV' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'LIST' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'LIST' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'LIST' to mod_ls
213.23.130.223 (192.168.0.20[192.168.0.20]) - passive data connection opened - local  : 213.23.130.223:4392
213.23.130.223 (192.168.0.20[192.168.0.20]) - passive data connection opened - remote : 192.168.0.20:1075
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'LIST' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'LIST' to mod_ls
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'TYPE I' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'TYPE I' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'TYPE I' to mod_xfer
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'TYPE I' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - Entering Passive Mode (213,23,130,223,17,41).
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'PASV' to mod_log



--------------------------------------------------------------------------------------
.: Hier ist der Teil über den erfolgreich abgeschlossenen Upload dokumentiert!!!

213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'STOR testdatei' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'STOR testdatei' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'STOR testdatei' to mod_xfer
213.23.130.223 (192.168.0.20[192.168.0.20]) - in dir_check(): setting umask to 0002 (was 0002)
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'STOR testdatei' to mod_xfer
213.23.130.223 (192.168.0.20[192.168.0.20]) - chown(/upload/test/testdatei) to gid 101 successful
213.23.130.223 (192.168.0.20[192.168.0.20]) - passive data connection opened - local  : 213.23.130.223:4393
213.23.130.223 (192.168.0.20[192.168.0.20]) - passive data connection opened - remote : 192.168.0.20:1165
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'STOR testdatei' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'STOR testdatei' to mod_xfer
213.23.130.223 (192.168.0.20[192.168.0.20]) - Transfer completed: 32978432 bytes in 4.28 seconds
--------------------------------------------------------------------------------------



213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'TYPE A' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'TYPE A' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'TYPE A' to mod_xfer
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'TYPE A' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'PASV' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - Entering Passive Mode (213,23,130,223,17,42).
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'PASV' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'LIST' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'LIST' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'LIST' to mod_ls
213.23.130.223 (192.168.0.20[192.168.0.20]) - passive data connection opened - local  : 213.23.130.223:4394
213.23.130.223 (192.168.0.20[192.168.0.20]) - passive data connection opened - remote : 192.168.0.20:1196
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'LIST' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching LOG_CMD command 'LIST' to mod_ls
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'QUIT' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'QUIT' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching PRE_CMD command 'QUIT' to mod_log
213.23.130.223 (192.168.0.20[192.168.0.20]) - dispatching CMD command 'QUIT' to mod_core
213.23.130.223 (192.168.0.20[192.168.0.20]) - FTP session closed.

Wie kann ich es nun realisieren, daß abgebrochene Uploads nun doch automatisch vom Server gelöscht werden?

[Wörsty]

Ich sehe keinen Abbruch.

[NickTheRipper]

Dank Dir für die schnelle Antwort!

Genau, das ist ja auch mir schleierhaft, denn ProFTPD erkennt den Abbruch nicht als diesen, sondern ist der Meinung es handelt sich um einen komplett abgeschlossenen Upload, obwohl dieser abgebrochen wurde.

Ich habe die Testdatei einfach hochgeladen und beim hochladen habe ich auf "abbruch" geklickt und diesen Abruch des Uploads hätte meiner Meinung nach ProFTPD erkennen müssen, oder sehe ich das falsch?

[stonki]

Dank Dir für die schnelle Antwort!

Ich habe die Testdatei einfach hochgeladen und beim hochladen habe ich auf "abbruch" geklickt und diesen Abruch des Uploads hätte meiner Meinung nach ProFTPD erkennen müssen, oder sehe ich das falsch?

hmm, uploade einmal und kille den Upload Prozess mittels (kill -9) oder eben unter Windows. Kann ja sein, dass "Abbrechen" beim Client sich noch schön beendet. ProFTPD kann ja _nicht_ wissen, wie gross die Datei sein soll.

cu
stonki

[Wörsty]

kille den Upload Prozess mittels (kill -9) oder eben unter Windows.

Nur damit du uns richtig verstehst... Den FTP-Client killen - nicht proftpd!

[NickTheRipper]

Ich hab Euren Tip befolgt und den FTP-Clienten unter Windows einfach zur Strecke gebracht, aber ProFTPD ist weiterhin der Meinung der Upload wäre vollständig.

Als Dateigröße zeigt er korrekterweise die Größe des bereits raufgeladenen Files an, aber ProFTPD ist der Meinung das dies korrekt ist und wertet dies im Debug als "Transfer completed" aus.

Als ProFTPD läuft der aktuelle (V1.2.9RC3).

Den Befehl "DeleteAbortedStores on" kann man ja in verschidenen Sektionen einbinden, aber jegliche Versuche sind gescheitert. Der abgebrochene Upload wird immer als "Transfer completed" ausgewertet.

[stonki]

Als ProFTPD läuft der aktuelle (V1.2.9RC3).

Den Befehl "DeleteAbortedStores on" kann man ja in verschidenen Sektionen einbinden, aber jegliche Versuche sind gescheitert. Der abgebrochene Upload wird immer als "Transfer completed" ausgewertet.

ist nen Bug, kann ich bei mir nachvollziehen. Du siehst, das im transferlog auch (C) für Complete steht.

cu
stonki

[Wörsty]

Wer schreibt den BUG-Report :arrow: http://bugs.proftpd.org/  :?:

Ich. http://bugs.proftpd.org/show_bug.cgi?id=2254

[Wörsty]

Habe das gerade nochmal getestet.
Bei mir geht's, wenn ich den Client kille.
Wenn ich ABORT benutze, klappt es nicht.

Version: 1.2.9rc3 (devel)

[Wörsty]

Na toll. Nun haben wir 2 Bugreports :roll:  :arrow: 2253 und 2254

[stonki]

Na toll. Nun haben wir 2 Bugreports :roll:  :arrow: 2253 und 2254

http://bugs.proftpd.org/show_bug.cgi?id=1541

das ist der richtige und es gibt wenig Hoffnung :(

cu
stonki

[Wörsty]

Bei mir kommt gar kein ABOR...
Upps. Naja.  :?

[NickTheRipper]

Ich danke Euch für die schnelle Erstellung eines Bugreports! Ist es nun eigentlich ein Problem von ProFTPD, oder ein Problem des verwendeten FTP-Clienten, der eventuell den "ABORT" - Befehl nicht ordnungsgemäß an ProFTPD übergibt, dies ist für mich aus den beiden erstellten und weiter dokumentierten Bugreports nicht richtig ersichtlich?

[stonki]

Ich danke Euch für die schnelle Erstellung eines Bugreports! Ist es nun eigentlich ein Problem von ProFTPD, oder ein Problem des verwendeten FTP-Clienten, der eventuell den "ABORT" - Befehl nicht ordnungsgemäß an ProFTPD übergibt, dies ist für mich aus den beiden erstellten und weiter dokumentierten Bugreports nicht richtig ersichtlich?

also so wie ich das verstanden habe, ein Problem des Clients und nicht vom Server...

cu
stonki

[Wörsty]

:dito)