Hallo!
Ich benutze proftpd auf SuSE Linux 10.2 und habe einen VHCS2 Server zu laufen.
Ich habe folgende Pakete zur Installation benutzt:
proftpd-1.3.0a-6.1.i586.rpm
proftpd-sql-mysql-1.3.0a-6.1.i586.rpm
Die Installation klappte problemlos und der Server läuft auch.
Wenn ich mich aber über VHCS über den Filemanager einloggen will, bringt er immer incorrect password und user.
Ich vermute es liegt daran das folgende Einträge fehlen:
SQLAuthTypes Crypt
SQLAuthenticate on
VHCS2 liefert daher folgende proftpd.conf mit.
#
# VHCS proftpd config file
#
#
ServerName "{HOST_NAME}"
ServerType standalone
DeferWelcome off
ShowSymlinks on
MultilineRFC2228 on
DefaultServer on
ShowSymlinks on
AllowOverwrite on
LogFormat traff "%b %u"
TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200
DisplayLogin welcome.msg
DisplayFirstChdir .message
#LsDefaultOptions "-l"
DenyFilter \*.*/
DefaultRoot ~
# Uncomment this if you are using NIS or LDAP to retrieve passwords:
#PersistentPasswd off
# Port 21 is the standard FTP port.
Port 21
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30
# Set the user and group that the server normally runs at.
User nobody
Group nogroup
# Normally, we want files to be overwriteable.
<Directory /*>
# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
AllowOverwrite on
HideNoAccess on
</Directory>
<Limit ALL>
IgnoreHidden on
</Limit>
<Global>
TransferLog /var/log/xferlog
ExtendedLog /var/log/ftp_traff.log read,write traff
PathDenyFilter "\.quota$"
</Global>
<IfModule mod_delay.c>
DelayEngine off
</IfModule>
#
# VHCS2 Managment;
#
SQLAuthTypes Crypt
SQLAuthenticate on
SQLConnectInfo {DATABASE_NAME}@{DATABASE_HOST} {DATABASE_USER} {DATABASE_PASS}
SQLUserInfo ftp_users userid passwd uid gid homedir shell
SQLGroupInfo ftp_group groupname gid members
SQLMinID 2000
#
# VHCS2 Quota management;
#
QuotaEngine on
QuotaShowQuotas on
QuotaDisplayUnits Mb
SQLNamedQuery get-quota-limit SELECT "name, quota_type, per_session, limit_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail, files_out_avail, files_xfer_avail FROM quotalimits WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM quotatallies WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name = '%{6}' AND quota_type = '%{7}'" quotatallies
SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" quotatallies
QuotaLock /var/run/proftpd/tally.lock
QuotaLimitTable sql:/get-quota-limit
QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally
Diese funktioniert aber nicht, denn er bringt dann immer folgende Fehlermeldung:
Checking syntax of configuration file
- Fatal: unknown configuration directive 'SQLAuthTypes' on line 82 of '/etc/proftpd/proftpd.conf'
Meine proftpd.conf mit der meiner FTP Server ist wunderbar läuft aber halt ohne mysql sieht so aus:
# This is a basic ProFTPD configuration file (rename it to
# 'proftpd.conf' for actual use. It establishes a single server
# and a single anonymous login. It assumes that you have a user/group
# "nobody" and "ftp" for normal operation and anon.
ServerName
"ProFTPD Default Installation"
ServerType
standalone
DefaultServer
on
# Port 21 is the standard FTP port.
Port
21
# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask
022
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd).
MaxInstances
30
# Set the user and group under which the server will run.
User
nobody
Group
nogroup
# To cause every FTP user to be "jailed" (chrooted) into their home
# directory, uncomment this line.
#DefaultRoot ~
# Normally, we want files to be overwriteable.
AllowOverwrite
on
# Bar use of SITE CHMOD by default
<Limit SITE_CHMOD>
DenyAll
</Limit>
# A basic anonymous configuration, no upload directories. If you do not
# want anonymous users, simply delete this entire <Anonymous> section.
<Anonymous ~ftp>
User
ftp
Group
ftp
# We want clients to be able to login with "anonymous" as well as "ftp"
UserAlias
anonymous ftp
# Limit the maximum number of anonymous logins
MaxClients
10
# We want 'welcome.msg' displayed at login, and '.message' displayed
# in each newly chdired directory.
DisplayLogin
welcome.msg
DisplayFirstChdir
.message
# Limit WRITE everywhere in the anonymous chroot
<Limit WRITE>
DenyAll
</Limit>
</Anonymous>
<Global>
</Global>
Ich hoffe mir kann einer helfen. Verstehe nicht, was ich falsch gemacht habe.
Danke im Voraus
lakul
