Hallo zusammen,
nach einem apt-get upgrade auf einem Debian Testing-System bekomme ich beim Start von proftpd folgende Fehlermeldung :
s1:/var/log# /etc/init.d/proftpd start
Starting ftp server: proftpd/etc/init.d/proftpd: line 91: 25543 Speicherzugriffsfehler start-stop-daemon --start --quiet --pidfile "$PIDFILE" --exec $DAEMON -- $OPTIONS
failed!
Proftpd.conf
#
# Includes required DSO modules. This is mandatory in proftpd 1.3
#
Include /etc/proftpd/modules.conf
#
# VHCS proftpd config file
#
#
ServerName fXXXX.de
ServerType standalone
DeferWelcome on
#Bind
ShowSymlinks on
MultilineRFC2228 on
DefaultServer on
ShowSymlinks on
AllowOverwrite on
LogFormat traff "%b %u"
TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200
DisplayLogin welcome.msg
DisplayFirstChdir .message
#ListOptions "-l"
DenyFilter \*.*/
DefaultRoot ~
RequireValidShell off
# Uncomment this if you are using NIS or LDAP to retrieve passwords:
#PersistentPasswd off
# Port 21 is the standard FTP port.
Port 21
#port 20
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30
MaxClientsPerUser 2
MaxClientsPerHost 2
#MaxClients 5
MaxLoginAttempts 3
# Set the user and group that the server normally runs at.
User nobody
Group nogroup
# Normally, we want files to be overwriteable.
<Directory /*>
# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
AllowOverwrite on
HideNoAccess on
</Directory>
<Limit ALL>
IgnoreHidden on
</Limit>
DelayEngine off
<Global>
TransferLog /var/log/xferlog
ExtendedLog /var/log/ftp_traff.log read,write traff
PathDenyFilter "\.quota$"
# Log file/dir access
ExtendedLog /var/log/proftpd/proftpd.access_log WRITE,READ write
# Record all logins
ExtendedLog /var/log/proftpd/proftpd.auth_log AUTH auth
# Paranoia logging level....
#ExtendedLog /var/log/proftpd.paranoid_log ALL default
</Global>
LogFormat default "%h %l %u %t \"%r\" %s %b"
LogFormat auth "%v [%P] %h %t \"%r\" %s"
LogFormat write "%h %l %u %t \"%r\" %s %b"
#<IfModule mod_delay.c>
# DelayEngine off
#</IfModule>
#<IfModule mod_auth_pam.c>
# AuthPAM off
#</IfModule>
#<IfModule mod_sql.c>
# SQLAuthenticate on
#</IfModule>
#
# VHCS2 Managment;
#
SQLAuthTypes Backend Crypt Plaintext
#SQLAuthenticate users*
SQLAuthenticate on
SQLConnectInfo vhcs2@localhost XXXX XXXXXXXXXX
#AuthOrder mod_sql.c
#SQLDefaultHomedir /var/www/test
#SQLDefaultGID 65534
#SQLDefaultUID 65534
#SQLMinUserGID 100
#SQLMinUserUID 500
SQLUserInfo ftp_users userid passwd uid gid homedir shell
SQLGroupInfo ftp_group groupname gid members
SQLMinID 2000
#
# VHCS2 Quota management;
#
QuotaEngine on
QuotaShowQuotas on
QuotaDisplayUnits Mb
SQLNamedQuery get-quota-limit SELECT "name, quota_type, per_session, limit_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail, files_out_avail, files_xfer_avail FROM quotalimits WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM quotatallies WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name = '%{6}' AND quota_type = '%{7}'" quotatallies
SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" quotatallies
QuotaLock /var/run/proftpd/tally.lock
QuotaLimitTable sql:/get-quota-limit
QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally
modules.conf die die nicht lief bzw. den obigen Fehler hervorbrachte, evtl kann mich ja mal jemand aufklären weiso weshalb das so war
#
# This file is used to manage DSO modules and features.
#
# This is the directory where DSO modules resides
ModulePath /usr/lib/proftpd
# Allow only user root to load and unload modules, but allow everyone
# to see which modules have been loaded
ModuleControlsACLs insmod,rmmod allow user root
ModuleControlsACLs lsmod allow user *
#LoadModule mod_ctrls_admin.c
#LoadModule mod_tls.c
#LoadModule mod_sql.c
#LoadModule mod_ldap.c
LoadModule mod_sql_mysql.c
#LoadModule mod_sql_postgres.c
LoadModule mod_quotatab.c
LoadModule mod_quotatab_file.c
#LoadModule mod_quotatab_ldap.c
#LoadModule mod_quotatab_sql.c
#LoadModule mod_radius.c
#LoadModule mod_wrap.c
LoadModule mod_rewrite.c
# keep this module the last one
LoadModule mod_ifsession.c
und während ich dieses schrieb gab es den hirnblitz *gg
eigentlich war die Konfig so ähnlich schon die ganze Zeit drinne nur beim Update krachte sie dann und dann habe ich ein mal alle Modules auskomentiert gehabt was die Lage nicht besserte.
erst als ich die Modules.conf in folgende wieder änderte funzte es plötzlich wieder wobei ich mir fast gar sicher bin das die Module in der reihenfolge und aktivierung auch vorher drin standen.
ModulePath /usr/lib/proftpd
# Allow only user root to load and unload modules, but allow everyone
# to see which modules have been loaded
ModuleControlsACLs insmod,rmmod allow user root
ModuleControlsACLs lsmod allow user *
#LoadModule mod_ctrls_admin.c
#LoadModule mod_tls.c
LoadModule mod_sql.c
#LoadModule mod_ldap.c
LoadModule mod_sql_mysql.c
#LoadModule mod_sql_postgres.c
LoadModule mod_quotatab.c
LoadModule mod_quotatab_file.c
#LoadModule mod_quotatab_ldap.c
LoadModule mod_quotatab_sql.c
#LoadModule mod_radius.c
#LoadModule mod_wrap.c
LoadModule mod_rewrite.c
# keep this module the last one
LoadModule mod_ifsession.c
