# # this config file was automatically generated # using lirc-0.6.2 on Sat Mar 10 20:38:35 2001 # # contributed by Eric Johanson # # brand: Videologic # model: RM-201 # supported devices: # # Notes: This remote may not be made by videologic, however, # it came with DigiTheatre Decoder. # # http://www.videologic.com/Products/VL-60384/ProductIntro.asp?Product=VL-60384A begin remote name videologic_rm201 bits 13 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 9062 4487 one 606 1642 zero 606 516 ptrail 584 repeat 9059 2239 pre_data_bits 16 pre_data 0x61D6 post_data_bits 3 post_data 0x7 gap 107940 toggle_bit 0 begin codes power 0x0000000000000916 test 0x0000000000000B14 mute 0x0000000000000F10 speaker_mode 0x000000000000100F balance 0x0000000000000817 bass 0x000000000000041B delay 0x000000000000140B volume_up 0x0000000000001807 volume_down 0x0000000000000C13 input 0x000000000000021D surround 0x000000000000120D pro_logic_auto_on 0x0000000000000A15 reset 0x0000000000001F00 end codes end remote