# this config file was automatically generated # using lirc-0.7.0pre6(serial) on Fri Jul 2 18:57:35 2004 # # contributed by Matt Perry # # brand: Sony # model no. of remote control: RM-V302 # devices being controlled by this remote: TV # # *** NOTE *** # Due to conflicts with Sony TVs, these bindings are for VCR mode! # Be sure to switch to VCR mode before reporting that these don't work! # *** NOTE *** # begin remote name RM-V302 bits 12 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 2481 515 one 1288 500 zero 698 500 gap 44894 min_repeat 2 toggle_bit 0 begin codes POWER 0x0000000000000A9A 1 0x000000000000001A 2 0x000000000000081A 3 0x000000000000041A 4 0x0000000000000C1A 5 0x000000000000021A 6 0x0000000000000A1A 7 0x000000000000061A 8 0x0000000000000E1A 9 0x000000000000011A 0 0x000000000000091A ENT 0x0000000000000D1A VOL_UP 0x0000000000000490 CHAN_UP 0x000000000000009A VOL_DOWN 0x0000000000000C90 DISPLAY 0x00000000000005BA CHAN_DOWN 0x000000000000089A SLEEP 0x0000000000000F3A MUTING 0x0000000000000290 UP 0x000000000000043A LEFT 0x000000000000047A RIGHT 0x000000000000087A DOWN 0x0000000000000C3A MENU 0x0000000000000B3A OK 0x00000000000008BA RW 0x0000000000000D9A PLAY 0x000000000000059A FF 0x000000000000039A STOP 0x000000000000019A PAUSE 0x000000000000099A end codes end remote # # this config file was automatically generated # using lirc-0.7.0pre4(hauppauge) on Sat Sep 4 17:41:26 2004 # # contributed by Nicholas J Kreucher # # brand: Sony # model no. of remote control: RM-V302 (VCR code 013) # devices being controlled by this remote: # # notes: # this remote can emulate just about every remote out there. using the # wintv IR receiver only a small set would actually work. using VCR # mode 013 (philips) seemed to produce the best results with only # RECALL, DISPLAY, ENT, PIP and GUIDE buttons missing. TV/VIDEO # and SLEEP are duplicates (pick one :) # begin remote name Sony_RM-V302-VCR013 bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 889 889 zero 889 889 plead 889 gap 113792 toggle_bit 2 begin codes 1 0x0000000000001941 2 0x0000000000001142 3 0x0000000000001943 4 0x0000000000001144 5 0x0000000000001945 6 0x0000000000001146 7 0x0000000000001947 8 0x0000000000001148 9 0x0000000000001949 0 0x0000000000001140 POWER 0x000000000000194C VOL+ 0x0000000000001010 VOL- 0x0000000000001811 CH+ 0x0000000000001160 CH- 0x0000000000001961 TV/VIDEO 0x000000000000117E # SLEEP 0x000000000000117E MUTE 0x000000000000100D UP 0x0000000000000150 RIGHT 0x0000000000000156 DOWN 0x0000000000000151 LEFT 0x0000000000000155 MENU 0x0000000000000152 OK 0x0000000000000157 SEEK- 0x0000000000001972 PLAY 0x0000000000001175 SEEK+ 0x0000000000001974 RECORD 0x0000000000001177 STOP 0x0000000000001176 PAUSE 0x0000000000001969 end codes end remote # lirc-0.7.1-46 # # brand: Sony # model no. of remote control: RM-V302 (DVD code 010) # devices being controlled by this remote: Hauppage PVR-250 # # notes: # ENT, PIP, REC and GUIDE buttons don't work # begin remote name Sony_RM-V302-DVD010 bits 13 flags RC5|CONST_LENGTH eps 30 aeps 100 one 889 889 zero 889 889 plead 889 gap 113792 toggle_bit 2 begin codes POWER 0x150C 1 0x1525 2 0x1526 3 0x1527 4 0x1519 5 0x153D 6 0x1516 7 0x1517 8 0x1518 9 0x152B 0 0x151D VOL+ 0x1810 VOL- 0x1811 CH+ 0x1534 CH- 0x1533 TV/VIDEO 0x1500 DISPLAY 0x1532 SLEEP 0x1510 MUTE 0x180D RECALL 0x1501 UP 0x1502 DOWN 0x1508 LEFT 0x1504 RIGHT 0x1506 MENU 0x1503 OK 0x1505 SEEK- 0x1535 PLAY 0x1530 SEEK+ 0x1536 PAUSE 0x153C STOP 0x1520 end codes end remote