# # this config file was automatically generated # using lirc-0.6.2 on Wed Dec 6 09:44:21 2000 # # contributed by Claus Misfeldt # # brand: SONY # model: RM-D57A # supported devices: DAT-Recorder DTC-57ES # begin remote name DAT bits 11 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 2446 587 one 1226 577 zero 625 577 ptrail 1228 gap 45128 toggle_bit 0 begin codes open 0x0000000000000023 start_auto 0x0000000000000053 start_write 0x0000000000000453 skip_write 0x0000000000000153 end_write 0x00000000000000D3 display 0x0000000000000693 start_renumber 0x0000000000000653 start_erase 0x0000000000000253 skip_erase 0x0000000000000553 end_erase 0x00000000000004D3 1 0x0000000000000003 2 0x0000000000000403 3 0x0000000000000203 4 0x0000000000000603 5 0x0000000000000103 6 0x0000000000000503 7 0x0000000000000303 8 0x0000000000000703 9 0x0000000000000083 0 0x0000000000000143 clear 0x00000000000003C3 music_scan 0x00000000000001B3 rms_check 0x00000000000005C3 rms_enter 0x00000000000006C3 repeat 0x0000000000000363 margin_reset 0x0000000000000393 skip_play 0x00000000000006D3 date_rec 0x00000000000002A3 date_pres 0x00000000000004A3 rec 0x00000000000005E3 circle 0x00000000000007E3 fader 0x00000000000007D3 |<< 0x00000000000000B3 >>| 0x00000000000004B3 stop 0x00000000000000E3 play 0x00000000000002E3 pause 0x00000000000004E3 << 0x00000000000006E3 >> 0x00000000000001E3 cd-pause 0x00000000000004E8 cd-|<< 0x0000000000000068 cd->>| 0x0000000000000468 # "cd-synchro-stop" is equal to "stop" # "cd-synchro-start" sends the sequence "pause" | "cd-pause" # "cd-synchro-stdby" sends the sequence "stop" | "pause" end codes end remote