#
# this config file was automatically generated
# using lirc-0.6.6(sir) on Fri Aug 20 12:35:54 2004
#
# contributed by Daniel Pekelharing <pekelharing|tiscali.co.za>
#
# brand : Sharp
# model no.: G1208AJ
# used by : Sharp VCSA335 (VCR)
#
# This is the VCR section of this remote, the TV section is appended to the end.
begin remote
name G1208AJ
bits 15
flags SPACE_ENC|CONST_LENGTH
eps 30
aeps 100
one 431 1665
zero 431 625
ptrail 431
gap 63668
min_repeat 2
toggle_bit 0
toggle_mask 0x3FF
begin codes
POWER 0x00000000000061A2
LOCK 0x00000000000062C2
TIMER_ON_OFF 0x0000000000006262
BLANK 0x0000000000006062
SKIP_SEARCH 0x0000000000006026
ZERO_BACK 0x0000000000006306
MENU 0x0000000000006066
SET 0x0000000000006166
UP 0x0000000000006266
DOWN 0x00000000000060E6
LEFT 0x00000000000062E6
RIGHT 0x0000000000006366
TIMER 0x000000000000600E
CLEAR 0x0000000000006012
1 0x0000000000006202
2 0x0000000000006102
3 0x0000000000006302
4 0x0000000000006082
5 0x0000000000006282
6 0x0000000000006182
7 0x0000000000006382
8 0x0000000000006042
9 0x0000000000006242
0 0x0000000000006142
MODE_OSD 0x00000000000062C6
DISPLAY 0x00000000000060C6
CHANNEL_UP 0x0000000000006222
CHANNEL_DOWN 0x0000000000006122
INPUT_SELECT 0x00000000000060B2
AM_PM 0x0000000000006342
REWIND 0x0000000000006312
PLAY 0x0000000000006112
FAST_FORWARD 0x0000000000006212
STOP 0x0000000000006392
RECORD 0x0000000000006052
PAUSE 0x0000000000006292
SLOW 0x0000000000006252
DPSS- 0x0000000000006032
DPSS+ 0x00000000000063D2
TIME 0x00000000000061C2
BLANK_2 0x00000000000063E2
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.6.6(sir) on Fri Aug 20 12:38:17 2004
#
# contributed by Daniel Pekelharing <pekelharing|tiscali.co.za>
#
# brand : Sharp
# model no. : G1208AJ
# used by : TV
#
# This is the TV section of the above Control.
begin remote
name G1208AJ_TV
bits 8
flags SPACE_ENC|CONST_LENGTH
eps 30
aeps 100
one 282 1827
zero 282 772
ptrail 281
post_data_bits 7
post_data 0x22
gap 67500
toggle_bit 0
toggle_mask 0x3FF
begin codes
OPERATE 0x0000000000000083
INPUT_SELECT 0x0000000000000086
CHANNEL_UP 0x0000000000000084
CHANNEL_DOWN 0x0000000000000082
VOLUME_UP 0x0000000000000081
VOLUME_DOWN 0x0000000000000085
end codes
end remote