#
# this config file was automatically generated
# using lirc-0.6.6(sa1100) on Thu Jun 19 18:34:04 2003
#
# contributed by Daniel Glöckner
#
# brand:                                   Schneider
# model no. of remote control:             RC 202
# devices being controlled by this remote: STV 3680
#

begin remote

  name  RC202
  bits           16
  flags SPACE_ENC|CONST_LENGTH|REPEAT_HEADER|REVERSE
  eps            30
  aeps          100

  header       4329  4511
  one           585  1661
  zero          585   546
  ptrail        585
  repeat        585   541
  pre_data_bits   16
  pre_data       0x0B0B
  gap          107506
  min_repeat      1
  toggle_bit      0


      begin codes
          0                        0xFF00
          1                        0xFE01
          2                        0xFD02
          3                        0xFC03
          4                        0xFB04
          5                        0xFA05
          6                        0xF906
          7                        0xF807
          8                        0xF708
          9                        0xF609
          power                    0xF50A
          vt                       0xF40B
          av                       0xF30C
          10+                      0xF20D
          vol+                     0xF10E
          vol-                     0xF00F
	  picture                  0xEF10
          info                     0xEE11
	  
          exp                      0xEC13
          mute                     0xEB14
          timer                    0xEA15
          pr+                      0xE916
          pr-                      0xE817
          hold                     0xE718
          subpage                  0xE619
          mix                      0xE51A
          reveal                   0xE41B
          red                      0xE31C
          green                    0xE21D
          yellow                   0xE11E
          blue                     0xE01F
      end codes

end remote