#
# this config file was automatically generated
# using lirc-0.6.5(serial) on Fri Aug 30 20:12:12 2002
#
# contributed by Jason Gladen
#
# brand: Sanyo
# model no. of remote control: IR-5211
# devices being controlled by this remote: VCR
#

begin remote

  name  VCR
  bits           16
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       9065  4400
  one           621  1623
  zero          621   500
  ptrail        639
  repeat       9063  2163
  pre_data_bits   16
  pre_data       0x8C73
  gap          107655
  toggle_bit      0


      begin codes
          power                    0x000000000000DA25
          tv/vcr                   0x00000000000010EF
          program                  0x000000000000629D
          clear                    0x00000000000052AD
          1                        0x00000000000020DF
          2                        0x000000000000A05F
          3                        0x000000000000609F
          4                        0x000000000000E01F
          5                        0x00000000000030CF
          6                        0x000000000000B04F
          set                      0x000000000000D22D
          7                        0x000000000000708F
          8                        0x000000000000F00F
          9                        0x00000000000038C7
          1--                      0x000000000000D827
          ch/track_down            0x00000000000040BF
          ch/track_up              0x000000000000807F
          0                        0x000000000000B847
          play                     0x00000000000028D7
          rew                      0x00000000000048B7
          ff                       0x000000000000C837
          stop                     0x00000000000008F7
          rec                      0x000000000000A857
          tape_speed               0x0000000000007A85
          pause/still              0x0000000000008877
          clk/count                0x000000000000A25D
          reset                    0x00000000000022DD
          memory                   0x000000000000C23D
      end codes

end remote