# # this config file was automatically generated # using lirc-0.8.1-CVS(default) on Fri Oct 13 23:04:45 2006 # # contributed by Frank Bennett # # brand: Pioneer # model no. of remote control: BR-V3 CATV # devices being controlled by this remote: Pioneer Digital CATV STB BD-V300 # begin remote name Pioneer_BR-V3_CATV bits 32 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 8511 4281 one 566 1560 zero 566 504 ptrail 566 gap 89952 toggle_bit 0 begin codes tv-dengen 0x55AA38C7 tv-nyuuryoku-kirikae 0x55AAC837 tv-channel-up 0x55AA08F7 tv-channel-down 0x55AA8877 dengen 0x35CA38C7 sleep 0x35CA12ED chijou-channel 0x35CACC33 bs-cs 0x35CACC33 catv 0x35CACC33 1 0x35CA807F 2 0x35CA40BF 3 0x35CAC03F 4 0x35CA20DF 5 0x35CAA05F 6 0x35CA609F 7 0x35CAE01F 8 0x35CA10EF 9 0x35CA906F 10-0 0x35CA00FF 11 0x35CACC33 12 0x35CACC33 channel-up 0x35CA08F7 channel-down 0x35CA8877 ch 0x35CACC33 mute 0x55AA926D volume-up 0x55AA50AF volume-down 0x55AAD02F ff-left 0x35CAD22D ff-right 0x35CAC837 ff-down 0x35CAF20D ff-up 0x35CA728D up 0x35CA1AE5 down 0x35CA9A65 left 0x35CAEA15 right 0x35CA6A95 kettei 0x35CA32CD guide 0x35CA0AF5 shousai 0x35CA2AD5 data 0x35CACC33 modoru 0x35CACA35 aoi 0x35CACC33 akai 0x35CACC33 midori 0x35CACC33 kiiroi 0x35CACC33 navi 0x35CA18E7 vod 0x35CACC33 browser 0x35CACC33 okonomi 0x35CA22DD genre-kensaku 0x35CACC33 channel-hyouji 0x35CA52AD channel-ichiran 0x35CADA25 channel-return 0x35CA3AC5 gazou 0x35CACC33 onsei 0x35CA7887 jimaku 0xF50A8C73 end codes end remote # # this config file was automatically generated # using lirc-0.8.1-CVS(default) on Mon Oct 16 07:50:58 2006 # # contributed by Frank Bennett # # brand: Pioneer # model no. of remote control: BR-V3 # devices being controlled by this remote: BD-V300 CATV STB # # # This configuration file works only to send signals to the # STB using irsend. It will not work to interpret signals # sent by the remote. # # The BD-V300 remote sends some commands as two 32-bit elements. # Because the STB expects to see commands repeated once, this means # you need to send four codes (A, B, A, B) for these commands. # The remaining codes (those without a suffix) should be sent # twice to trigger action by the STB. # # # Here are a few examples using irsend: # # Change to terrestrial television mode: # # irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 chijo-A chijo-B chijo-A chijo-B # # Change to cable television mode: # # irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 catv-A catv-B catv-A catv-B # # Change to channel 231 # # irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 ch-A ch-B ch-A ch-B # sleep 1 # irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 2 2 # sleep 1 # irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 3 3 # sleep 1 # irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 1 1 # begin remote name Pioneer_BR_V3 bits 32 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 8509 4280 one 566 1560 zero 566 504 ptrail 566 gap 89937 min_repeat 0 toggle_bit 0 begin codes dengen 0x35CA38C7 chijo-A 0x35CACC33 chijo-B 0xF50ADC23 bscs-A 0x35CACC33 bscs-B 0xF50ABC43 catv-A 0x35CACC33 catv-B 0xF50A7C83 ch-A 0x35CACC33 ch-B 0xF50A3CC3 1 0x35CA807F 2 0x35CA40BF 3 0x35CAC03F 4 0x35CA20DF 5 0x35CAA05F 6 0x35CA609F 7 0x35CAE01F 8 0x35CA10EF 9 0x35CA906F 10-0 0x35CA00FF 11-A 0x35CACC33 11-B 0xF50A9C63 12-A 0x35CACC33 12-B 0xF50A1CE3 onsei 0x35CA7887 jimaku-A 0x35CACC33 jimaku-B 0xF50A8C73 end codes end remote