# contributed by Anders Torger
#
# brand:             Philips
# model:             SBC RU120
# supported devices: Universal TV remote, supports lots of TV sets.
#
# Note: this is the default setup of the remote (what you get after resetting 
# it). Other setups will of course require another configuration file.

begin remote

  name  SBC_RU120
  bits            6
  flags RC5|CONST_LENGTH
  eps            30
  aeps          100

  one           888   886
  zero          888   886
  plead         877
  pre_data_bits   7
  pre_data       0x40
  gap          112897
  min_repeat      5
  toggle_bit      2


      begin codes
          UP                       0x0000000000000020
          DOWN                     0x0000000000000021
          LEFT                     0x0000000000000011
          RIGHT                    0x0000000000000010
          SHIFT_UP                 0x0000000000000014
          SHIFT_DOWN               0x0000000000000015
          SHIFT_LEFT               0x0000000000000013
          SHIFT_RIGHT              0x0000000000000012
          MUTE                     0x000000000000000D
          STANDBY                  0x000000000000000C
      end codes

end remote