#
# Hand modified from:
# this config file was automatically generated
# using lirc-0.7.0(serial) on Thu Dec 16 02:28:28 2004
#
# contributed by Frank Banks
#
# brand: Fortec
# model no. of remote control: 
# devices being controlled by this remote: Fortec Lifetime (Pre March) Sat Reciver
#
# Modified for Pansat 2500A for this remote (there is a second remote w/ unknown codes and prefix)
#

begin remote

  name  Pansat_2500a
  bits           16
  flags SPACE_ENC
  eps            30
  aeps          100

  header       9000  4500
  one           540  1700
  zero          540   580
  ptrail        540
  repeat       9000  2200
  pre_data_bits   16
  pre_data       0x9F
  gap          108100
  min_repeat      1
  toggle_bit      0


      begin codes
          1                        0x8877
          2                        0x48B7
          3                        0xC837
          4                        0x28D7
          5                        0xA857
          6                        0x6897
          7                        0xE817
          8                        0x18E7
          9                        0x9867
          0                        0x08F7
          Power                    0x50AF
          Mute                     0x30CF
          Fav                      0xB847
          PageUP                   0x22DD
          PageDOWN                 0xC23D
          Exit                     0xD827
          Last                     0x38C7
          Menu                     0x30CF
          ChanUp                   0x00FF
          ChanDown                 0x807F
          OK                       0xF807
          Sat                      0x7887
          Info                     0x20DF
          TV/Radio                 0x10EF
          Pause                    0xA05F
          Audio                    0x906F
          Guide                    0x827D
          Signal                   0xE01F
          VolUp                    0x40BF
          VolDown                  0xC03F
          Sat_TV                   0x609F
      end codes

end remote