#
# this config file was automatically generated
# using lirc-0.7.0pre2(serial) on Thu Dec 25 20:14:13 2003
#
# contributed by Steve Williamson (cdwhistler@catsgomeow.com)
#
# brand: One-For-All
# model no. of remote control: URC-6012w
# devices being controlled by this remote: This is for a
# Sony VCR and the code is 0033. I just cloned the vcr button to the sat
# button and then set the code 0033. It lets you use almost all of the
# buttons.
#
begin remote
name URC-6012w
bits 11
flags SPACE_ENC|CONST_LENGTH
eps 30
aeps 100
header 2447 573
one 1232 564
zero 633 564
ptrail 636
gap 45527
min_repeat 2
toggle_bit 0
begin codes
Menu 0x0000000000000594
Guide 0x0000000000000034
Select 0x0000000000000454
Exit 0x00000000000002A4
UpArrow 0x0000000000000214
DownArrow 0x0000000000000614
LeftArrow 0x0000000000000234
RightArrow 0x0000000000000434
VolUp 0x0000000000000244
VolDown 0x0000000000000644
ChUp 0x0000000000000044
ChDown 0x0000000000000444
Mute 0x0000000000000564
One 0x0000000000000004
Two 0x0000000000000404
Three 0x0000000000000204
Four 0x0000000000000604
Five 0x0000000000000104
Six 0x0000000000000504
Seven 0x0000000000000304
Eight 0x0000000000000704
Nine 0x0000000000000084
Zero 0x0000000000000484
Enter 0x0000000000000684
Play 0x00000000000002C4
Rew 0x00000000000006C4
Fwd 0x00000000000001C4
Stop 0x00000000000000C4
Pause 0x00000000000004C4
Prev 0x00000000000000A4
Rec 0x00000000000005C4
Power 0x0000000000000544
end codes
end remote