# # this config file was automatically generated # using lirc-0.6.6(any) on Mon Dec 8 21:21:57 2003 # # contributed by Tony Maro # http://tony.maro.net # # brand: One For All # model no. of remote control: URC-6012 6 in one # devices being controlled by this remote: MythTV # # # I haven't successfully used the FAV button on any code # # VCR Code # 0039 (Zenith) # Handles all buttons but info, frew, ffwd, move, pip, # swap and sleep (and fav). # NOTE: TV/VCR and MUTE send the same signal # and: Select and Enter send the same signal # # I had many problems finding a good code for this # universal remote but after trial and error found a couple # that would work without requiring raw mode and that have # good range using my homebuilt receiver # Have fun! # # Use in combination with the urc6012-2 file and remap # buttons to give you full control begin remote name urc6012-1 bits 21 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 one 571 5008 zero 571 426 ptrail 568 gap 179586 min_repeat 1 toggle_bit 0 begin codes 1 0x0000000000176D76 2 0x0000000000176BB6 3 0x0000000000176B76 4 0x0000000000175DB6 5 0x0000000000175D76 6 0x0000000000175BB6 7 0x0000000000175B76 8 0x000000000016EDB6 9 0x000000000016ED76 0 0x0000000000176DB6 rew 0x00000000001B6B76 play 0x00000000001B5D76 fwd 0x00000000001ADDB6 rec 0x000000000016DBB6 pause 0x000000000016EB76 frew 0x00000000001B5DB6 stop 0x00000000001B5DB6 power 0x00000000001ADBB6 mute 0x00000000001AEB76 prev 0x00000000001B6DAE vol- 0x00000000001B6BB6 vol+ 0x00000000001AEBB6 ch- 0x00000000001B6D76 ch+ 0x00000000001AED76 down 0x000000000016DD76 left 0x00000000001B5BB6 up 0x00000000001B6D6E right 0x00000000001ADB76 select 0x000000000016DDB6 exit 0x00000000001B6B6E guide 0x00000000001B6DB6 menu 0x000000000016DB76 end codes end remote # # this config file was automatically generated # using lirc-0.6.6(any) on Mon Dec 8 21:55:17 2003 # # contributed by Tony Maro # http://tony.maro.net # # brand: One For All # model no. of remote control: URC-6012 6 in one # devices being controlled by this remote: MythTV # # # Use TV code # 0017 (Zenith) # # I had many problems finding a good code for this # universal remote but after trial and error found a couple # that would work without requiring raw mode and that have # good range using my homebuilt receiver # Have fun! # # Use in combination with the urc6012-1 file and remap # buttons to give you full control begin remote name urc6012-2 bits 16 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 one 576 4004 zero 576 420 ptrail 576 gap 179588 min_repeat 2 toggle_bit 0 begin codes pip 0x0000000000006D6D swap 0x0000000000006BB6 sleep 0x0000000000006DAD power 0x0000000000006B6E enter 0x0000000000005B76 tvvcr 0x0000000000006B75 mute 0x0000000000006BAD prev 0x0000000000005BAD vol- 0x0000000000006DAE vol+ 0x0000000000006BAE ch- 0x0000000000006DB5 ch+ 0x0000000000006BB5 down 0x0000000000005B75 left 0x0000000000006D6E up 0x0000000000005B6E right 0x0000000000006B6D select 0x0000000000005B75 exit 0x0000000000006DB6 guide 0x0000000000006D76 menu 0x0000000000005B6D 1 0x0000000000005DB5 2 0x0000000000005DAE 3 0x0000000000005DAD 4 0x0000000000005D76 5 0x0000000000005D75 6 0x0000000000005D6E 7 0x0000000000005D6D 8 0x0000000000005BB6 9 0x0000000000005BB5 0 0x0000000000005DB6 end codes end remote