#
# this config file was automatically generated
# using WinLIRC 0.6.5 (LIRC 0.6.1pre3) on Sat Jul 30 16:03:01 2005
#
# contributed by 
#
# brand:             Minolta_remote_control
# model:             RC-3
# supported devices:
#       Most Minolta Kameras will work with this file 
#	Minolta Dimage F100, F200, F300, S414, Dynax 60
#
# Source:
#	The original Minolta remote control is very expensive (~30EUR for only two keys)
#	Via Internet you can find an universal remote control:
#	Snapshot Tech: Camera Remote Control RC-C2
#	that supports Minolta, Canon, Pentax, Nikon for only ~10EUR
#	so I used the cheap way and hope it will be usefull for you...
#

begin remote

  name  Minolta_RC3
  bits            8
  flags SPACE_ENC
  eps            25
  aeps          100

  header       3872  1708
  one           527   436
  zero          527  1331
  ptrail        527
  pre_data_bits   24
  pre_data       0xD3AC7D
  gap          9052
  toggle_bit      0


      begin codes
          one_sec                  0x000000000000007F
          two_sec                  0x00000000000000FF
      end codes

end remote