#
# this config file was hand-generated using raw data
# recorded by lirc-0.8.0 (mode2) on Sat May 12 20:33:07 2006
#
# contributed by                             K. Benoit
#
# brand:                                     Lutron
# model no. of remote control:               MaestroIR
# devices being controlled by this remote:   Lighting
#

begin remote

  name  Lutron_MaestroIR
  flags CONST_LENGTH|RAW_CODES
  eps            30
  aeps          100

# one         2288 0
# zero        0 2288
  ptrail        0
  repeat     0   0
  gap    82368
  frequency     40000
  duty_cycle    40

     begin raw_codes

     name Scene
           20688    6842    2340    6869    2319    9150
            2343    4555    2320    2271    4605    2273
            6911

     name Raise
           20687    6842    2316    6868    2316   11454
            2322    6840    2345    6868    2314

     name Lower
           20687    6840    2321    6866    2318   11456
            2320    9149    2318    2297    2320

     name Off
           20688   6845    2339    6866    2320    2273
           9228    2268    2292    6842    2344    4556
           2367

     name On
           20685   6843    2315    6870    2317    9151
           2340    4577    2296    2282    6907

     end raw_codes

end remote

#------------------------------
# These values are provided by
# Lutron in their documentation
# but they do not function as
# expected in lircd:
#
#  bits           36
#
#    begin codes
#        Scene     0xFF8884B70
#        Raise     0xFF8882220
#        Lower     0xFF8882140
#        Off       0xFF88BD120
#        On        0xFF8884B80
#    end codes
#