#
# this config file was automatically generated
# using lirc-0.7.0-CVS(any) on Fri Jan 28 10:27:02 2005
#
# contributed by 
#
# brand:                       ELMAK
# model no. of remote control: MT-1041
# devices being controlled by this remote:
#

begin remote

  name  MT-1041
  bits            7
  flags SPACE_ENC|REVERSE
  eps            10
  aeps          100

  one           240  6862
  zero          240  4840
  ptrail        240
  gap          13980
  toggle_bit      0


      begin codes
          MUTE                     0x02
          POWER                    0x04
          1                        0x22
          2                        0x24
          3                        0x26
          4                        0x28
          5                        0x2A
          6                        0x2C
          7                        0x2E
          8                        0x30
          9                        0x32
          0                        0x36
          10                       0x34
          12                       0x38
          13                       0x3A
          14                       0x3C
          15                       0x3E
          16                       0x20
          PC                       0x40
          P+                       0x48
          P-                       0x4A
          VOL+                     0x50
          VOL-                     0x52
          OK                       0x00
          RED                      0x0A
          BLUE                     0x1C
          COL+                     0x58
          COL-                     0x5A
          BRI+                     0x54
          BRI-                     0x56
          CON+                     0x5C
          CON-                     0x5E
          STORE                    0x16
          FT+                      0x0C
          C                        0x44
          M                        0x42
          FT-                      0x0E
          FA                       0x06
      end codes

end remote