www.ProFTPD.de

ProFTPD => ProFTPD - Deutsch => Thema gestartet von: driessen am 05. Januar 2007, 14:50:48



Titel: proftpd: line 91: 25543 Speicherzugriffsfehler
Beitrag von: driessen am 05. Januar 2007, 14:50:48
Hallo zusammen,

nach einem apt-get upgrade auf einem Debian Testing-System bekomme ich beim Start von proftpd folgende Fehlermeldung :

s1:/var/log# /etc/init.d/proftpd start
Starting ftp server: proftpd/etc/init.d/proftpd: line 91: 25543 Speicherzugriffsfehler  start-stop-daemon --start --quiet --pidfile "$PIDFILE" --exec $DAEMON -- $OPTIONS
 failed!

Proftpd.conf
Zitat
#
# Includes required DSO modules. This is mandatory in proftpd 1.3
#
Include /etc/proftpd/modules.conf

#
#       VHCS proftpd config file
#
#

ServerName                      fXXXX.de
ServerType                      standalone
DeferWelcome                    on

#Bind
ShowSymlinks                    on
MultilineRFC2228                on
DefaultServer                   on
ShowSymlinks                    on
AllowOverwrite                  on

LogFormat                       traff "%b %u"

TimeoutNoTransfer               600
TimeoutStalled                  600
TimeoutIdle                     1200

DisplayLogin                    welcome.msg
DisplayFirstChdir               .message

#ListOptions                "-l"

DenyFilter                      \*.*/

DefaultRoot                     ~
RequireValidShell               off

# Uncomment this if you are using NIS or LDAP to retrieve passwords:
#PersistentPasswd               off

# Port 21 is the standard FTP port.

Port                            21
#port                           20
# To prevent DoS attacks, set the maximum number of child processes
# to 30.  If you need to allow more than 30 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)

MaxInstances                    30
MaxClientsPerUser                2
MaxClientsPerHost                2
#MaxClients                       5
MaxLoginAttempts                 3
# Set the user and group that the server normally runs at.

User                            nobody
Group                           nogroup

# Normally, we want files to be overwriteable.

<Directory /*>
  # Umask 022 is a good standard umask to prevent new files and dirs
  # (second parm) from being group and world writable.
  Umask                         022  022

  AllowOverwrite                on
  HideNoAccess on

</Directory>

<Limit ALL>
  IgnoreHidden on
</Limit>
DelayEngine off
<Global>
        TransferLog                     /var/log/xferlog
        ExtendedLog                     /var/log/ftp_traff.log read,write traff
        PathDenyFilter "\.quota$"
        # Log file/dir access
        ExtendedLog /var/log/proftpd/proftpd.access_log WRITE,READ write
        # Record all logins
        ExtendedLog /var/log/proftpd/proftpd.auth_log AUTH auth
        # Paranoia logging level....
        #ExtendedLog /var/log/proftpd.paranoid_log ALL default
</Global>

LogFormat default "%h %l %u %t \"%r\" %s %b"
LogFormat auth "%v [%P] %h %t \"%r\" %s"
LogFormat write "%h %l %u %t \"%r\" %s %b"


#<IfModule mod_delay.c>
#       DelayEngine off
#</IfModule>
#<IfModule mod_auth_pam.c>
#       AuthPAM off
#</IfModule>
#<IfModule mod_sql.c>
#       SQLAuthenticate on
#</IfModule>
#
# VHCS2 Managment;
#

SQLAuthTypes Backend Crypt Plaintext
#SQLAuthenticate users*
SQLAuthenticate on
SQLConnectInfo  vhcs2@localhost XXXX XXXXXXXXXX
#AuthOrder mod_sql.c
#SQLDefaultHomedir /var/www/test
#SQLDefaultGID  65534
#SQLDefaultUID  65534
#SQLMinUserGID  100
#SQLMinUserUID  500
SQLUserInfo ftp_users userid passwd uid gid homedir shell
SQLGroupInfo ftp_group groupname gid members
SQLMinID 2000



#
# VHCS2 Quota management;
#

QuotaEngine on
QuotaShowQuotas on
QuotaDisplayUnits Mb

SQLNamedQuery get-quota-limit SELECT "name, quota_type, per_session, limit_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail,           files_out_avail, files_xfer_avail FROM quotalimits WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM   quotatallies WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used +    %{2}, files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name = '%{6}' AND          quota_type = '%{7}'" quotatallies
SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" quotatallies

QuotaLock /var/run/proftpd/tally.lock
QuotaLimitTable sql:/get-quota-limit
QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally

modules.conf die die nicht lief bzw. den obigen Fehler hervorbrachte, evtl kann mich ja mal jemand aufklären weiso weshalb das so war

Zitat
#
# This file is used to manage DSO modules and features.
#

# This is the directory where DSO modules resides

ModulePath /usr/lib/proftpd

# Allow only user root to load and unload modules, but allow everyone
# to see which modules have been loaded

ModuleControlsACLs insmod,rmmod allow user root
ModuleControlsACLs lsmod allow user *

#LoadModule mod_ctrls_admin.c
#LoadModule mod_tls.c
#LoadModule mod_sql.c
#LoadModule mod_ldap.c
LoadModule mod_sql_mysql.c
#LoadModule mod_sql_postgres.c
LoadModule mod_quotatab.c
LoadModule mod_quotatab_file.c
#LoadModule mod_quotatab_ldap.c
#LoadModule mod_quotatab_sql.c
#LoadModule mod_radius.c
#LoadModule mod_wrap.c
LoadModule mod_rewrite.c

# keep this module the last one
LoadModule mod_ifsession.c


und während ich dieses schrieb gab es den hirnblitz *gg

eigentlich war die Konfig so ähnlich schon die ganze Zeit drinne nur beim Update krachte sie dann und dann habe ich ein mal alle Modules auskomentiert gehabt was die Lage nicht besserte.
erst als ich die Modules.conf in folgende wieder änderte funzte es plötzlich wieder wobei ich mir fast gar sicher bin das die Module in der reihenfolge und aktivierung auch vorher drin standen.

Zitat
ModulePath /usr/lib/proftpd

# Allow only user root to load and unload modules, but allow everyone
# to see which modules have been loaded

ModuleControlsACLs insmod,rmmod allow user root
ModuleControlsACLs lsmod allow user *

#LoadModule mod_ctrls_admin.c
#LoadModule mod_tls.c
LoadModule mod_sql.c
#LoadModule mod_ldap.c
LoadModule mod_sql_mysql.c
#LoadModule mod_sql_postgres.c
LoadModule mod_quotatab.c
LoadModule mod_quotatab_file.c
#LoadModule mod_quotatab_ldap.c
LoadModule mod_quotatab_sql.c
#LoadModule mod_radius.c
#LoadModule mod_wrap.c
LoadModule mod_rewrite.c

# keep this module the last one
LoadModule mod_ifsession.c


Titel: Re: proftpd: line 91: 25543 Speicherzugriffsfehler
Beitrag von: VolGas am 19. Januar 2007, 08:07:13
Hallo!

Bei einem Speicherzugriffsfehler ist anzunehmen, daß Du ein defektes ProFTPD-Binary im System hast.
Dies ist zwar ein ProFTPD-Forum, aber wenn Du ein defektes Binary aus einem Test-Branch von Debian benutzt,
dann brauchst Du Dich auch über nichts zu wundern. Benutze Debian stable oder compiliere Deinen ProFTPD selbst -
sonst wende Dich bitte an den/die Maintainer des entsprechenden Debian-Paketes.

mfg.
  VolGas