# This is a basic ProFTPD configuration file. It establishes a single
# server and a single anonymous login. It assumes that you have a
# user/group "nobody"/"nogroup" for normal operation and anon.
# !!! PLEASE read the documentation of proftpd !!!
#
# You can find the documentation in /usr/doc/packages/proftpd/,
#
http://www.proftpd.org/ and don't forget to read carefully
# and _follow_ hints on
http://www.proftpd.net/security.html.
ServerName ftp.daheim.de "powered by SuSE Linux"
ServerType standalone
ServerAdmin root@localhost
#
# uncomment, if you want to hide the servers name:
#
ServerIdent on "FTP Server ready"
DeferWelcome off
DefaultServer on
# Enable PAM for authentication...
#
#AuthPAM on
# Setting this directive to on will cause authentication to fail
# if PAM authentication fails. The default setting, off, allows
# other modules and directives such as AuthUserFile and friends
# to authenticate users.
#
#AuthPAMAuthoritative off
# This directive allows you to specify the PAM service name used
# in authentication (default is "proftpd" on SuSE Linux).
# You have to setup the service in the /etc/pam.d/<other_name>.
#
#AuthPAMConfig <other_name>
# Port 21 is the standard FTP port.
Port 21
# disable listen on 0.0.0.0:21 - the port (and IP) should
# be specified explicitly in each VirtualHost definition
#
#Port 0
# listen for each (additional) address explicitly that is
# specified (via Bind and Port) in a VirtualHost definition
#
#SocketBindTight on
# Umask 022 is a good standard umask to prevent new dirs
# and files from being group and world writable.
Umask 113
# Set the user and group that the server normally runs at.
User nobody
Group nobody
# Normally, we want files to be overwriteable.
<Directory /*>
AllowOverwrite on
AllowRetrieveRestart on
AllowStoreRestart on
HiddenStor off
HideNoAccess off
<Limit READE WRITE EXECUTE>
AllowAll
</Limit>
</Directory>
# protect .ftpaccess and similar - see also PathDenyFilter
#<Directory /*.ftp*>
# <Limit ALL>
# DenyAll
# IgnoreHidden on
#</Directory>
# It is a very good idea to allow only filenames containing normal
# alphanumeric characters for uploads (and not shell code...)
#PathAllowFilter "^[a-zA-Z0-9_.-]+$"
#PathAllowFilter "^[a-zA-Z0-9~ \*\/,_.-]+$"
# We don't want .ftpaccess or .htaccess files to be uploaded
#PathDenyFilter "(\.ftp)|(\.ht)[a-z]+$"
#PathDenyFilter "\.ftp[a-z]+$"
# Do not allow to pass printf-Formats (security! see documentation!):
#AllowFilter "^[a-zA-Z0-9@~' \*\/,_.-]*$"
DenyFilter "%"
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30
# Performance: skip DNS resolution when we process the logs...
UseReverseDNS on
# Turn off Ident lookups
IdentLookups off
# Set the maximum number of seconds a data connection is allowed
# to "stall" before being aborted.
TimeoutStalled 500
# Where do we put the pid files?
#ScoreboardPath /var/run/proftpd
#
# Logging options
#
TransferLog /var/log/xferlog
# Some logging formats
#
#LogFormat default "%h %l %u %t \"%r\" %s %b"
#LogFormat auth "%v [%P] %h %t \"%r\" %s"
#LogFormat write "%h %l %u %t \"%r\" %s %b"
# Log file/dir access
#ExtendedLog /var/log/proftpd.access_log WRITE,READ write
# Record all logins
#ExtendedLog /var/log/proftpd.auth_log AUTH auth
# Paranoia logging level....
##ExtendedLog /var/log/proftpd.paranoid_log ALL default
#
# Do a chroot for web-users (i.e. public or www group), but
# do not change root if the user is also in the users group...
#
#DefaultRoot ~/public_html public,!users
#
#***********************************
#FTP-Berechtigung ab Verzeichnis ...
#***********************************
DefaultRoot / root
DefaultRoot /home dvb,t-systems,audio,tools,tauschen,leipzig
#DefaultRoot ~
#****************************************
# Startverzeichnisse der FTP-User der IDS
#****************************************
#User mit FTP-Zugriff ab /
DefaultChdir / root
#User mit Zugriff auf mehrere Gruppen benoetigen Zugriff ab /home
#DefaultChdir /home ids-muc-szuadm,ids-muc-sdviag
#Startverzeichnisse fuer normale User (1 Gruppe)
Gruppen
DefaultRoot / root
DefaultRoot /home/dvb dvb
DefaultRoot /home/t-systems t-systems
DefaultRoot /home/audiofiles audio
DefaultRoot /home/mm_tools tools
DefaultRoot /home/tauschen tauschen
DefaultRoot /home/apache/www/kassen leipzig
# Limit login attempts
MaxLoginAttempts 3
# Users needs a valid shell
#RequireValidShell yes
#
# Use special Auth files instead....
#
#AuthUserFile /var/proftpd/authfiles/passwd
#AuthGroupFile /var/proftpd/authfiles/group
#
# Use LDAP server - see README.LDAP
#
#LDAPServer "localhost"
#LDAPPrefix "dc=your,dc=domain,dc=top"
#LDAPDN "cn=YourDNUser,dc=your,dc=domain,dc=top"
#LDAPDNPass "YourDNUserPassword"
# The ratio directives take four numbers: file ratio, initial file
# credit, byte ratio, and initial byte credit. Setting either ratio
# to 0 disables that check.
#
# The directives are HostRatio (matches FQDN -- wildcards are allowed
# in this one), AnonRatio (matches password entered in an anon login,
# usually an email address), UserRatio (accepts "*" for 'any user'),
# and GroupRatio. Matches are looked for in that order.
#
# Some examples:
#
# Ratios on # enable module
# UserRatio ftp 0 0 0 0
# HostRatio anyhost.domain.top 0 0 0 0 # leech access (default)
# GroupRatio proftpd 100 10 5 100000 # 100:1 files, 10 file cred
# AnonRatio
auser@domain.top 1 0 1 0 # 1:1 ratio, no credits
# UserRatio * 5 5 5 50000 # special default case
#
# Setting "Ratios on" without configuring anything else will enable
# leech mode: it logs activity and sends status messages to the ftp
# client, but doesn't restrict traffic.
#
# uncomment for anonymous...:
#
#<Anonymous ~ftp>
# # After anonymous login, daemon runs as:
# User ftp
# Group public
#
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
#
# # Limit the maximum number of anonymous logins
# MaxClients 10
#
# # We want 'welcome.msg' displayed at login, and '.message' displayed
# # in each newly chdired directory.
# DisplayLogin msgs/welcome.msg
# DisplayFirstChdir .message
#
# # Deny write operations to all directories, underneath root-dir
# # Default is to allow, so we don't need a <Limit> for read operations.
# <Directory *>
# <Limit SIZE WRITE>
# DenyAll
# </Limit>
# </Directory>
# #
# # Only uploads into incomming directory are allowed...
# #<Directory incoming>
# #
# # Umask 017
# #
# # # ... so deny read/write
# # <Limit READ WRITE DIRS>
# # DenyAll
# # </Limit>
# #
# # # ... allow file storing, but not other writes
# # <Limit STOR CWD CDUP>
# # AllowAll
# # </Limit>
# #
# #</Directory>
#
#</Anonymous>
Zeige Beiträge
