www.ProFTPD.de

/etc/init.d/proftpd restart

Starting ftp server: proftpd - Fatal: <IfModule>: unclosed <IfModule> context on line 139 of '/etc/proftpd/proftpd.conf'
 failed!

#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes reload proftpd after modifications.
#

# Includes DSO modules
Include /etc/proftpd/modules.conf

ServerName         "R14541"
ServerType         standalone
DeferWelcome         off

MultilineRFC2228      on
DefaultServer         on
ShowSymlinks         on

TimeoutNoTransfer      600
TimeoutStalled         600
TimeoutIdle         1200

DisplayLogin                    welcome.msg
DisplayFirstChdir               .message
ListOptions                   "-l"

DenyFilter         \*.*/

# Port 21 is the standard FTP port.
Port            21

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts                    49152 65534

# To prevent DoS attacks, set the maximum number of child processes
# to 30.  If you need to allow more than 30 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances         30

# Set the user and group that the server normally runs at.
User            proftpd
Group            nogroup

# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask            022  022
# Normally, we want files to be overwriteable.
AllowOverwrite         on

# Uncomment this if you are using NIS or LDAP to retrieve passwords:
# PersistentPasswd      off

# Be warned: use of this directive impacts CPU average load!
#
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
# UseSendFile         off

TransferLog /var/log/proftpd/xferlog
SystemLog   /var/log/proftpd/proftpd.log

<IfModule mod_tls.c>
TLSEngine off
</IfModule>

<IfModule mod_quota.c>
QuotaEngine on
</IfModule>

<IfModule mod_ratio.c>
Ratios on
</IfModule>


# Delay engine reduces impact of the so-called Timing Attack described in
# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine        on
ControlsMaxClients    2
ControlsLog           /var/log/proftpd/controls.log
ControlsInterval      5
ControlsSocket        /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine on
</IfModule>
# A basic anonymous configuration, no upload directories.

# <Anonymous ~ftp>
#   User            ftp
#   Group            nogroup
#   # We want clients to be able to login with "anonymous" as well as "ftp"
#   UserAlias         anonymous ftp
#   # Cosmetic changes, all files belongs to ftp user
#   DirFakeUser   on ftp
#   DirFakeGroup on ftp
#
#   RequireValidShell      off
#
#   # Limit the maximum number of anonymous logins
#   MaxClients         10
#
#   # We want 'welcome.msg' displayed at login, and '.message' displayed
#   # in each newly chdired directory.
#   DisplayLogin         welcome.msg
#   DisplayFirstChdir      .message
#
#   # Limit WRITE everywhere in the anonymous chroot
#   <Directory *>
#     <Limit WRITE>
#       DenyAll
#     </Limit>
#   </Directory>
#
#   # Uncomment this if you're brave.
#   # <Directory incoming>
#   #   # Umask 022 is a good standard umask to prevent new files and dirs
#   #   # (second parm) from being group and world writable.
#   #   Umask            022  022
#   #            <Limit READ WRITE>
#   #            DenyAll
#   #            </Limit>
#   #            <Limit STOR>
#   #            AllowAll
#   #            </Limit>
#   # </Directory>
#
# </Anonymous>

#
# This file is used to manage DSO modules and features.
#

# This is the directory where DSO modules resides

ModulePath /usr/lib/proftpd

# Allow only user root to load and unload modules, but allow everyone
# to see which modules have been loaded

ModuleControlsACLs insmod,rmmod allow user root
ModuleControlsACLs lsmod allow user *

#LoadModule mod_ctrls_admin.c
LoadModule mod_tls.c
LoadModule mod_sql.c
LoadModule mod_ldap.c
LoadModule mod_sql_mysql.c
LoadModule mod_sql_postgres.c
LoadModule mod_quotatab.c
LoadModule mod_quotatab_file.c
LoadModule mod_quotatab_ldap.c
LoadModule mod_quotatab_sql.c
LoadModule mod_radius.c
LoadModule mod_wrap.c
LoadModule mod_rewrite.c

# keep this module the last one
LoadModule mod_ifsession.c