|
Titel: LIST befehl dauer ca 5s Beitrag von: GreenRover am 02. April 2005, 12:40:23 der LIST befehl dauert imemr 3-5 sec WISO??
Aber der dir befehl auf der konsole dauer nur ms also ist davon aus zu gehen das die festplatte funktionier. debuglog: Code: LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching POST_CMD command 'PWD' to mod_sql LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching LOG_CMD command 'PWD' to mod_sql LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching LOG_CMD command 'PWD' to mod_log LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'TYPE A' to mod_tls LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'TYPE A' to mod_core LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'TYPE A' to mod_core LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching CMD command 'TYPE A' to mod_xfer LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching POST_CMD command 'TYPE A' to mod_sql LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching LOG_CMD command 'TYPE A' to mod_sql LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching LOG_CMD command 'TYPE A' to mod_log LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'PASV' to mod_tls LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'PASV' to mod_core LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'PASV' to mod_core LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching CMD command 'PASV' to mod_core LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - in dir_check_full(): path = '/bla/test/rufjgf', fullpath = '/www/htdocs/vhost/www/bla/test/rufjgf'. LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - Entering Passive Mode (192,168,254,232,128,83). LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching POST_CMD command 'PASV' to mod_sql LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching LOG_CMD command 'PASV' to mod_sql LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching LOG_CMD command 'PASV' to mod_log LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'LIST' to mod_tls LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'LIST' to mod_core LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'LIST' to mod_core LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching CMD command 'LIST' to mod_ls bis zur vorletzten zeile geht alles fix aber die letzte lässt halt 3-5sec auf sich warten. paranoid log: Code: LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching POST_CMD command 'PWD' to mod_sql LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching LOG_CMD command 'PWD' to mod_sql LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching LOG_CMD command 'PWD' to mod_log LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'TYPE A' to mod_tls LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'TYPE A' to mod_core LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'TYPE A' to mod_core LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching CMD command 'TYPE A' to mod_xfer LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching POST_CMD command 'TYPE A' to mod_sql LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching LOG_CMD command 'TYPE A' to mod_sql LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching LOG_CMD command 'TYPE A' to mod_log LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'PASV' to mod_tls LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'PASV' to mod_core LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'PASV' to mod_core LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching CMD command 'PASV' to mod_core LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - in dir_check_full(): path = '/bla/test/rufjgf', fullpath = '/www/htdocs/vhost/www/bla/test/rufjgf'. LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - FS: using system stat() LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - Entering Passive Mode (192,168,254,232,128,83). LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching POST_CMD command 'PASV' to mod_sql LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching LOG_CMD command 'PASV' to mod_sql LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching LOG_CMD command 'PASV' to mod_log LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'LIST' to mod_tls LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'LIST' to mod_core LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching PRE_CMD command 'LIST' to mod_core LAMPP-Serverlein (192.168.254.200[192.168.254.200]) - dispatching CMD command 'LIST' to mod_ls config: Code: ServerName "LAMPP-FTP-Server" ServerType standalone DefaultServer on # Port 21 is the standard FTP port. Port 21 # Umask 022 is a good standard umask to prevent new dirs and files # from being group and world writable. Umask 002 # To prevent DoS attacks, set the maximum number of child processes # to 30. If you need to allow more than 30 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 30 # Set the user and group that the server normally runs at. User www Group www-data # only for the web servers content DefaultRoot ~ # nobody is no normal user so we have to allow users with no real shell RequireValidShell off # nobody may be in /etc/ftpusers so we also have to ignore this file UseFtpUsers off LogFormat default "%h %l %u %t \"%r\" %s %b %D %m" ExtendedLog /opt/lampp/logs/proftpd.paranoid_log ALL default SQLLogFile /opt/lampp/logs/proftpd_mysql.log RootLogin off SQLAuthTypes Plaintext SQLAuthenticate users* SQLConnectInfo projekt@localhost ftpserver ftpserver SQLUserInfo users username password "NULL" "NULL" Directory "NULL" SQLDefaultUID 1002 SQLDefaultGID 33 # create a user's home directory on demand if it doesn't exist SQLHomedirOnDemand on # Update count every time user logs in # SQLLog PASS updatecount # SQLNamedQuery updatecount UPDATE "count=count+1, accessed=now() WHERE userid='%u'" ftpuser # SQLLog RETR,STOR,ERR_RETR,ERR_STOR transfer SQLLog RETR,SITE,DELE,STOR,MKD,RMD transfer SQLNamedQuery transfer INSERT "'%h', '%u', '%D', now(), '%r', %b" `ftp-transferlog` protokoll des ftp-clients: Code: Connecting to 192.168.254.232, Port 21 (#1) Connected. Waiting for response. 220 ProFTPD 1.2.10 Server (LAMPP-FTP-Server) [192.168.254.232] USER cdrom 331 Password required for cdrom. PASS xxxxxx 230 User cdrom logged in. SYST 215 UNIX Type: L8 REST 100 350 Restarting at 100. Send STORE or RETRIEVE to initiate transfer REST 0 350 Restarting at 0. Send STORE or RETRIEVE to initiate transfer PWD 257 "/" is current directory. TYPE A 200 Type set to A PASV 227 Entering Passive Mode (192,168,254,232,128,7). LIST 150 Opening ASCII mode data connection for file list 226 Transfer complete. Transfer done: 483 bytes in 10,025 secs (0,05 k/sec) CWD /Welcome in Space 250 CWD command successful PWD 257 "/Welcome in Space" is current directory. TYPE A 200 Type set to A PASV 227 Entering Passive Mode (192,168,254,232,128,8). LIST 150 Opening ASCII mode data connection for file list 226 Transfer complete. Transfer done: 750 bytes in 10,044 secs (0,07 k/sec) TYPE I 200 Type set to I PASV 227 Entering Passive Mode (192,168,254,232,128,9). RETR 10-AudioTrack 10.mp3 150 Opening BINARY mode data connection for 10-AudioTrack 10.mp3 (6080640 bytes) 226 Transfer complete. Transfer done: 6.080.640 bytes in 20,038 secs (303,46 k/sec) TYPE I 200 Type set to I PASV 227 Entering Passive Mode (192,168,254,232,128,10). RETR 09-AudioTrack 09.mp3 150 Opening BINARY mode data connection for 09-AudioTrack 09.mp3 (6901888 bytes) 226 Transfer complete. Transfer done: 6.901.888 bytes in 11,766 secs (586,60 k/sec) TYPE I 200 Type set to I PASV 227 Entering Passive Mode (192,168,254,232,128,11). RETR 08-AudioTrack 08.mp3 150 Opening BINARY mode data connection for 08-AudioTrack 08.mp3 (6623360 bytes) 226 Transfer complete. Transfer done: 6.623.360 bytes in 11,806 secs (561,02 k/sec) TYPE I 200 Type set to I PASV 227 Entering Passive Mode (192,168,254,232,128,12). RETR 07-AudioTrack 07.mp3 150 Opening BINARY mode data connection for 07-AudioTrack 07.mp3 (6412416 bytes) 226 Transfer complete. Transfer done: 6.412.416 bytes in 11,656 secs (550,14 k/sec) TYPE I 200 Type set to I PASV wenn ich z.B. 12 RMD befehle habe. fürhrt er diese innerhalb von ms aus aber das LIST dauert ewig. WISO ?? Festplattenbenchmark: LAMPP-Serverlein:/# time ls -alR --color=auto real 0m30.755s user 0m2.904s sys 0m5.357s das finde ich ganz gut für 20GB platte die halb voll ist. |