hi.
habe den 1.3.0er proftpd mit sämtlichen modulen kompiliert - keine fehler, läuft.
auch kann ich mod_gzipfs laden und die entsprechende direktive setzen, jedoch gzipt er nix, wenn ich in das entsprechende verzeichnis uploade.
die logs sagen natürlich auch nix.
# Loading required modules
LoadModule mod_autohost.c
LoadModule mod_ban.c
LoadModule mod_deflate.c
LoadModule mod_diskuse.c
LoadModule mod_gzipfs.c
LoadModule mod_ifsession.c
LoadModule mod_ldap.c
LoadModule mod_load.c
LoadModule mod_msg.c
LoadModule mod_quotatab.c
LoadModule mod_quotatab_file.c
LoadModule mod_quotatab_sql.c
LoadModule mod_quotatab_ldap.c
LoadModule mod_ratio.c
LoadModule mod_readme.c
LoadModule mod_rewrite.c
LoadModule mod_site_misc.c
LoadModule mod_sql.c
LoadModule mod_sql_mysql.c
LoadModule mod_tls.c
<IfModule mod_tls.c>
TLSEngine On
TLSLog /var/log/proftpd/tls.log
TLSProtocol SSLv23
TLSRequired Off
TLSRSACertificateFile /etc/proftpd/host.cert
TLSRSACertificateKeyFile /etc/proftpd/host.key
#TLSCACertificateFile /root/ssh_ca/ca.crt
TLSVerifyClient Off
</IfModule>
<IfModule mod_ban.c>
BanEngine off
BanTable /var/run/proftpd
BanLog /var/log/proftpd/ban.log
BanMessage "IP/Klasse/User %a%c%u ist gebannt. (evtl. zu viel Loginversuche)"
# events go here
BanOnEvent MaxLoginAttempts 1/00:00:30 00:03:00
</IfModule>
# This is a basic ProFTPD configuration file (rename it to
# 'proftpd.conf' for actual use. It establishes a single server
# and a single anonymous login. It assumes that you have a user/group
# "nobody" and "ftp" for normal operation and anon.
ServerName
"britmachine"
ServerType
standalone
ServerAdmin
britneyfreek@local.net
DefaultServer
on
# enable this if using ACLs with FQDNs
UseReverseDNS
off
IdentLookups
off
# do not log to syslog as by default
SystemLog
/var/log/proftpd/proftpd.log
# Port 21 is the standard FTP port.
Port
21
# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask
022
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd).
MaxInstances 30
# Set the user and group under which the server will run.
User
nobody
Group
nogroup
# To cause every FTP user to be "jailed" (chrooted) into their home
# directory, uncomment this line.
#DefaultRoot ~
# Normally, we want files to be overwriteable.
AllowOverwrite
off
# Bar use of SITE CHMOD by default
<Limit SITE_CHMOD>
DenyAll
</Limit>
<Global>
# Some standard timeout definitions
TimeoutIdle
180
# kick user after 3 minutes being idle
TimeoutStalled
60
# close stalled datatransfers
TimeoutSession
0
# time a session can endure
TimeoutNoTransfer
180
# kick client after x seconds of having done no transfer
# file transfer handling
AllowRetrieveRestart
on
AllowStoreRestart
off
DeleteAbortedStores
on
# disable req. off a valid shell because it is not nessecary in our case
RequireValidShell off
# messages
DisplayLogin
.ftpmsg.welcome
DisplayFirstChdir
readme.txt
# security
DefaultRoot
~ !staff
HiddenStor
on
MaxLoginAttempts
3
# 3 is the default
AllowForeignAddress
on
ShowSymlinks
off
DirFakeGroup
off
DirFakeUser
off
<Directory ~britneyfreek/share>
<Limit LIST,WRITE,STOR>
AllowAll
</Limit>
<Limit DELE>
DenyAll
</Limit>
</Directory>
# module configuration
<IfModule mod_sql.c>
<IfModule mod_sql_mysql.c>
# Enable SQL auth method
SQLAuthenticate users* groups* userset groupset
# SQL connection information
SQLConnectInfo proftpd@localhost pftp ftp
# Authentication
SQLAuthTypes Backend Plaintext
SQLDefaultGID 65534
SQLDefaultUID 65534
SQLMinUserGID 5000
SQLMinUserUID 10000
# sql users and groups
SQLUserInfo users username password uid gid homedir shell
SQLUserWhereClause "locked=0"
SQLGroupInfo groups groupname gid members
SQLGroupWhereClause "locked=0"
# Log access
SQLNamedQuery getcount SELECT "count, username FROM users WHERE username='%u' AND locked=0"
SQLNamedQuery getacctime SELECT "last_access, username, date_format(last_access, '%d.%m.%Y um %H:%i') as last_accessf FROM users WHERE username='%u' AND locked=0"
SQLNamedQuery updateacclog UPDATE "last_access=now(), count=count+1 WHERE username='%u' AND locked=0" users
SQLShowInfo PASS "230" " Du hast dich schon %{getcount}x eingeloggt. Letzter: %{getacctime}"
SQLLog PASS updateacclog
# Transfer logging
SQLLog STOR,RETR xfer
SQLNamedQuery xfer INSERT "'%u', '%f', '%b', '%h', '%a', '%m', '%T', now(), now()" log_xfer
</IfModule>
</IfModule>
<IfModule mod_load.c>
MaxLoad 2.0 "Server ist ausgelastet, bitte warten."
</IfModule>
<IfModule mod_diskusage.c>
#MaxDiskUsage percent|"none" ["user"|"class"|"group" expression]
</IfModule>
<IfModule mod_deflate.c>
DeflateEngine on
DeflateLog /var/log/proftpd/deflate.log
UseSendfile off
</IfModule>
<IfModule mod_gzipfs.c>
# will be the upload folder from the user logged in
GzipFS ~/upload 9
</IfModule>
</Global>
# A basic anonymous configuration, no upload directories. If you do not
# want anonymous users, simply delete this entire <Anonymous> section.
<Anonymous ~ftp>
User
ftp
Group
ftp
# We want clients to be able to login with "anonymous" as well as "ftp"
UserAlias
anonymous ftp
# Limit the maximum number of anonymous logins
MaxClients 10 "Es sind schon max %m Clients verbunden."
MaxClientsPerHost 3 "Du benutzt schon %m Verbindungen. Mehr geht nicht."
# We want 'welcome.msg' displayed at login, and '.message' displayed
# in each newly chdired directory.
DisplayLogin
.ftpmsg.welcome
DisplayFirstChdir
.message
# Limit WRITE everywhere in the anonymous chroot
<Limit WRITE>
DenyAll
</Limit>
<Directory ~ftp/stuff>
<Limit DELE STOR WRITE>
DenyAll
</Limit>
</Directory>
<Directory upload/*>
<Limit STOR WRITE DELE>
AllowAll
</Limit>
</Directory>
</Anonymous>
lag an der verwendung der tilde im gobal-block...
