www.ProFTPD.de
13. März 2007, 20:04:58 *
Willkommen Gast. Bitte einloggen oder registrieren.
Haben Sie Ihre Aktivierungs E-Mail übersehen?

Einloggen mit Benutzername, Passwort und Sitzungslänge
News: SMF - Neu installiert!
 
   Übersicht   Hilfe Suche Login Registrieren  
Seiten: [1]   Nach unten
  Drucken  
Autor Thema: 530 login incorrect  (Gelesen 348 mal)
0 Mitglieder und 1 Gast betrachten dieses Thema.
sir_ride
ProFTPD
*
Offline Offline

Beiträge: 1

9945658
Profil anzeigen
« am: 25. Oktober 2004, 10:31:12 »

Hi
Ich googel nun schon ne weile und habe leider noch nix wirklich gefunden.
Ich habe proftpd 1.24, hatte vorher wuftp mit den gleichen problemen.
Ich erhalte permanent 530 login incorrect.
Anbei den log und das conf
was habe ich falsch konfigutiert?
bei wuftpd konnte ich anonym anmelden und da schrieben sie, die shell sei nicht im /etc/shells, ist sie aber

www (62.203.148.229[62.203.148.229]) - connected - local  : 192.168.2.2:21
www (62.203.148.229[62.203.148.229]) - connected - remote : 62.203.148.229:13643
www (62.203.148.229[62.203.148.229]) - FTP session opened.
www (62.203.148.229[62.203.148.229]) - dispatching PRE_CMD command 'USER doris' to mod_core
www (62.203.148.229[62.203.148.229]) - dispatching PRE_CMD command 'USER doris' to mod_auth
www (62.203.148.229[62.203.148.229]) - dispatching CMD command 'USER doris' to mod_auth
www (62.203.148.229[62.203.148.229]) - dispatching PRE_CMD command 'PASS (hidden)' to mod_core
www (62.203.148.229[62.203.148.229]) - dispatching PRE_CMD command 'PASS (hidden)' to mod_auth
www (62.203.148.229[62.203.148.229]) - dispatching CMD command 'PASS (hidden)' to mod_auth
www (62.203.148.229[62.203.148.229]) - USER doris: user is not a UserAlias from 62.203.148.229 [62.203.148.229] to 192.168.2.2:21
www (62.203.148.229[62.203.148.229]) - FTP session closed.

meine Config

# This is the ProFTPD configuration file

ServerName                      "ProFTPD server"
ServerIdent                     on "FTP Server ready."
ServerAdmin                     root@localhost
ServerType                      standalone
#ServerType                     inetd
DefaultServer                   on
AccessGrantMsg                  "User %u logged in."
#DisplayConnect                 /etc/ftpissue
#DisplayLogin                   /etc/ftpmotd
#DisplayGoAway                  /etc/ftpgoaway
DeferWelcome                    off

# Use this to excude users from the chroot
DefaultRoot                     ~ !adm

# Use pam to authenticate by default
AuthPAMAuthoritative            off

# Do not perform ident nor DNS lookups (hangs when the port is filtered)
IdentLookups                    off
UseReverseDNS                   off

# Port 21 is the standard FTP port.
Port                            21

# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask                           022

# Default to show dot files in directory listings
LsDefaultOptions                "-a"

# See Configuration.html for these (here are the default values)
#MultilineRFC2228               off
#RootLogin                      off
#LoginPasswordPrompt            on
#MaxLoginAttempts               3
#MaxClientsPerHost              none
#AllowForeignAddres             off     # For FXP

# Allow to resume not only the downloads but the uploads too
AllowRetrieveRestart            on
AllowStoreRestart               on

# To prevent DoS attacks, set the maximum number of child processes
# to 30.  If you need to allow more than 30 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances                    20

# Set the user and group that the server normally runs at.
User                            nobody
Group                           nobody

# This is where we want to put the pid file
ScoreboardPath                  /var/run

# Normally, we want users to do a few things.
<Global>
  AllowOverwrite                yes
  <Limit ALL SITE_CHMOD>
    AllowAll
  </Limit>
AuthAliasOnly off
RequireValidShell off
UseFtpUsers off
AuthPAM on
AuthPAMConfig ftp
UserPassword doris 10VUS2FU51mZ.
</Global>

# Define the log formats
LogFormat                       default "%h %l %u %t \"%r\" %s %b"
LogFormat                       auth    "%v [%P] %h %t \"%r\" %s"

# A basic anonymous configuration, no upload directories.
<Anonymous ~ftp>
  # Uncomment the following line to allow anonymous access
  #RequireValidShell            off
  User                          ftp
  Group                         ftp
  AccessGrantMsg                "Anonymous login ok, restrictions apply."

  # We want clients to be able to login with "anonymous" as well as "ftp"
  UserAlias                     anonymous ftp

  # Limit the maximum number of anonymous logins
  MaxClients                    10 "Sorry, max %m users -- try again later"

  # Put the user into /pub right after login
  DefaultChdir                  /pub

  # We want 'welcome.msg' displayed at login, '.message' displayed in
  # each newly chdired directory and tell users to read README* files.
  DisplayLogin                  /welcome.msg
  DisplayFirstChdir             .message
  DisplayReadme                 README*

  # Some more cosmetic and not vital stuff
  DirFakeUser                   on ftpadm
  DirFakeGroup                  on ftpadm

  # Limit WRITE everywhere in the anonymous chroot
  <Limit WRITE SITE_CHMOD>
    DenyAll
  </Limit>

  # An upload directory that allows storing files but not retrieving
  # or creating directories.
  <Directory uploads/*>
    AllowOverwrite              no
    <Limit READ>
      DenyAll
    </Limit>

    <Limit STOR>
      AllowAll
    </Limit>
  </Directory>

  # Don't write anonymous accesses to the system wtmp file (good idea!)
  WtmpLog                       off

  # Loggin for the anonymous transfers
  ExtendedLog           /var/log/proftpd/access.log WRITE,READ default
  ExtendedLog           /var/log/proftpd/auth.log AUTH auth

</Anonymous>
Gespeichert
Seiten: [1]   Nach oben
  Drucken  
 
Gehe zu:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.2 | SMF © 2006-2007, Simple Machines LLC Prüfe XHTML 1.0 Prüfe CSS
Seite erstellt in 0.123 Sekunden mit 16 Zugriffen.