Mein Router ist auf DHCP eingestellt, gestern war ein Kumpel mit seinem Notebook hier und der hat eine IP bekommen, sein Notebook war auf DHCP eingestellt.

Was könnte ich nun machen, soll ich mal versuchen über YAST meine Wlan einzurichten?

GrussL

Der hat die DHCP-Adresse vlt. automatisch gesucht, Du musst die richtige von Hand eintragen.

OK, dann ist dein WLAN-Stick nicht für DHCP konfiguriert.
Du kannst zumindest mal versuchen, mit Yast dem Stick DHCP beizubringen.
Entweder DHCP (= Vollautomatik) oder manuell. Wenn man DHCP wählt, darf man nichts "richtiges" mehr von Hand eintragen.

hab mal meinen PC neu gestartet und musst mit Hilfe von ifconfig rausb0 up einbinden.

Mit Yast hat es leider nicht geholfen DHCP einzurichten.

Soll ich mit Hilfe von YAST manuell einrichten?

GrussL

Bitte Logfile ansehen, was da passiert ist.

hier ein Auszug von dem file boot.msg, wo ich glaube das das was damit zu tun hat:

<6>usb 2-6: new device found, idVendor=148f, idProduct=2573
<6>usb 2-6: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 2-6: Product: 802.11 bg WLAN
<6>usb 2-6: Manufacturer: Ralink
<6>usb 2-6: configuration #1 chosen from 1 choice
<4>nvidia: module license 'NVIDIA' taints kernel.
<6>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
<4>NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9746 Fri Dec 15 10:19:35 PST 2006
<4>rtusb init ====>
<4>DVB: registering new adapter (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver).
<6>input: TerraTec/qanu USB2.0 Highspeed DVB-T Receiver remote control as /class/input/input3
<4>idVendor = 0x148f, idProduct = 0x2573
<6>usbcore: registered new driver rt73
<6>usbcore: registered new driver cinergyT2
<6>Loading module: rt73usb - CVS (N/A) by http://rt2x00.serialmonkey.com/.
<6>usbcore: registered new driver rt73usb
<6>Loading module: rt2500usb - CVS (N/A) by http://rt2x00.serialmonkey.com/.
<6>usbcore: registered new driver rt2500usb
<4>rt73 driver version - 1.0.3.6 CVS
<6>***rt73***: Interface goes up for the first time, activating permanent MAC
<6>***rt73***: Active MAC is: 00:11:6b:39:e3:76.


Wenn was fehlt bitte bescheid geben

GrussL

Ja, das wichtigste fehlt

In einem vorherigen Auszug war folgendes zu sehen:
Mar 6 13:05:48 linux-xy5r ifup: Network interface is managed from NetworkManager

Dein USB-Stick wird also vom NetworkManager verwaltet. Ich kenne den NetworkManager allerdings überhaupt nicht und kann dir damit leider überhaupt nicht weiter helfen.

Vermutlich wirst du irgendwo in der Taskleiste ein kleines Netzwerksymbol, über das du die Karte(n) konfigurieren kannst.

ich bitte um Entschuldigen, aber ich werd mal meine ganze Boot.msg hier posten. Dann könnt Ihr Euch den Beitrag suchen, ich blicke da nicht besonders durch.

Inspecting /boot/System.map-2.6.18.2-34-default
Loaded 23895 symbols from /boot/System.map-2.6.18.2-34-default.
Symbols match kernel version 2.6.18.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<4>Bootdata ok (command line is root=/dev/hda7 vga=0x31a resume=/dev/sda5 splash=silent)
<5>Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
<4> BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
<4> BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
<4> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
<4> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
<6>DMI 2.3 present.
<7>ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa7c0
<7>ACPI: RSDT (v001 A M I OEMRSDT 0x11000514 MSFT 0x00000097) @ 0x000000007ffb0000
<7>ACPI: FADT (v001 A M I OEMFACP 0x11000514 MSFT 0x00000097) @ 0x000000007ffb0200
<7>ACPI: MADT (v001 A M I OEMAPIC 0x11000514 MSFT 0x00000097) @ 0x000000007ffb0390
<7>ACPI: OEMB (v001 A M I OEMBIOS 0x11000514 MSFT 0x00000097) @ 0x000000007ffc0040
<7>ACPI: DSDT (v001 A0036 A0036001 0x00000001 MSFT 0x0100000d) @ 0x0000000000000000
<6>Scanning NUMA topology in Northbridge 24
<6>Number of nodes 1
<6>Node 0 MemBase 0000000000000000 Limit 000000007ffb0000
<7>NUMA: Using 63 for the hash shift.
<6>Using node hash shift of 63
<6>Bootmem setup node 0 0000000000000000-000000007ffb0000
<7>On node 0 totalpages: 515894
<7> DMA zone: 2892 pages, LIFO batch:0
<7> DMA32 zone: 513002 pages, LIFO batch:31
<6>ACPI: PM-Timer IO Port: 0x808
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
<6>Processor #0 15:15 APIC version 16
<6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
<6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<6>Setting APIC routing to physical flat
<6>Using ACPI (MADT) for SMP configuration information
<6>Allocating PCI resources starting at 88000000 (gap: 80000000:7f780000)
<6>SMP: Allowing 2 CPUs, 1 hotplug CPUs
<4>Built 1 zonelists. Total pages: 515894
<5>Kernel command line: root=/dev/hda7 vga=0x31a resume=/dev/sda5 splash=silent
<6>bootsplash: silent mode.
<4>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 32768 bytes)
<6>time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
<6>time.c: Detected 2403.186 MHz processor.
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
<4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
<4>Checking aperture...
<4>CPU 0: aperture @ d0000000 size 256 MB
<4>Memory: 2056880k/2096832k available (1915k kernel code, 39564k reserved, 1278k data, 188k init)
<4>Calibrating delay using timer specific routine.. 4811.78 BogoMIPS (lpj=9623575)
<6>Security Framework v1.0.0 initialized
<4>Mount-cache hash table entries: 256
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<6>CPU 0/0 -> Node 0
<6>SMP alternatives: switching to UP code
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 3432k freed
<6>ACPI: Core revision 20060707
<6>Using local APIC timer interrupts.
<4>result 12516608
<6>Detected 12.516 MHz APIC timer.
<6>Brought up 1 CPUs
<6>testing NMI watchdog ... OK.
<4>migration_cost=0
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: Using configuration type 1
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: Probing PCI hardware (bus 00)
<6>PCI: enabled onboard AC97/MC97 devices
<7>Boot video device is 0000:01:00.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
<6>agpgart: Detected AGP bridge 0
<6>agpgart: AGP aperture is 256M @ 0xd0000000
<6>PCI-DMA: Disabling IOMMU.
<6>PCI: Bridge: 0000:00:01.0
<6> IO window: disabled.
<6> MEM window: f9f00000-fbffffff
<6> PREFETCH window: e0000000-f8ffffff
<7>PCI: Setting latency timer of device 0000:00:01.0 to 64
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
<4>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>TCP reno registered
<6>audit: initializing netlink socket (disabled)
<5>audit(1173199758.464:1): initialized
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20000180000, using 10240k, total 131072k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318 bytes,<6>...found (1280x1024, 59769 bytes, v3).
<4>Console: switching to colour frame buffer device 156x60
<6>fb0: VESA VGA frame buffer device
<6>Real Time Clock Driver v1.12ac
<6>Non-volatile memory driver v1.2
<6>Linux agpgart interface v0.101 (c) Dave Jones
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker as /class/input/input0
<6>input: AT Translated Set 2 keyboard as /class/input/input1
<4>logips2pp: Detected unknown logitech mouse model 62
<6>input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
<6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 4.39
<6>NET: Registered protocol family 1
<6>ACPI: (supports S0 S1 S3 S4 S5)
<6>Freeing unused kernel memory: 188k freed
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<5>SCSI subsystem initialized
<4>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
<3>ACPI: Getting cpuindex for acpiid 0x2
<7>libata version 2.00 loaded.
<7>sata_promise 0000:00:08.0: version 1.04
<6>GSI 16 sharing vector 0xA9 and IRQ 16
<6>ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 169
<6>sata_promise PATA port found
<6>ata1: SATA max UDMA/133 cmd 0xFFFFC20000022200 ctl 0xFFFFC20000022238 bmdma 0x0 irq 169
<6>ata2: SATA max UDMA/133 cmd 0xFFFFC20000022280 ctl 0xFFFFC200000222B8 bmdma 0x0 irq 169
<6>ata3: PATA max UDMA/133 cmd 0xFFFFC20000022300 ctl 0xFFFFC20000022338 bmdma 0x0 irq 169
<6>scsi0 : sata_promise
<6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata1.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32)
<6>ata1.00: configured for UDMA/133
<6>scsi1 : sata_promise
<6>ata2: SATA link down (SStatus 0 SControl 300)
<6>scsi2 : sata_promise
<4>ATA: abnormal status 0x7F on port 0xFFFFC2000002231C
<3>ata3: disabling port
<5> Vendor: ATA Model: SAMSUNG SP2504C Rev: VT10
<5> Type: Direct-Access ANSI SCSI revision: 05
<5>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: drive cache: write back
<5>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: drive cache: write back
<6> sda: sda1 < sda5 sda6 sda7 >
<5>sd 0:0:0:0: Attached scsi disk sda
<7>Losing some ticks... checking if CPU frequency changed.
<7>sata_via 0000:00:0f.0: version 2.0
<6>GSI 17 sharing vector 0xB1 and IRQ 17
<6>ACPI: PCI Interrupt 0000:00:0f.0[b] -> GSI 20 (level, low) -> IRQ 177
<6>sata_via 0000:00:0f.0: routed to hard irq line 10
<6>ata4: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xC000 irq 177
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<6>ata5: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xC008 irq 177
<6>scsi3 : sata_via
<6>ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
<4>ATA: abnormal status 0x7F on port 0xD407
<6>scsi4 : sata_via
<6>ata5: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
<4>ATA: abnormal status 0x7F on port 0xC807
<6>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
<6>ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 177
<6>PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 1
<6>VP_IDE: chipset revision 6
<6>VP_IDE: not 100% native mode: will probe irqs later
<6>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
<6> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hdaMA, hdbio
<6> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdcMA, hddMA
<7>Probing IDE interface ide0...
<4>hda: SAMSUNG HD400LD, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>hda: max request size: 512KiB
<6>hda: 781422768 sectors (400088 MB) w/8192KiB Cache, CHS=48641/255/63, UDMA(100)
<6>hda: cache flushes supported
<6> hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
<7>Probing IDE interface ide1...
<4>hdc: SAMSUNG CD-R/RW DRIVE SW-252F, ATAPI CD/DVD-ROM drive
<4>hdd: TSSTcorpCD/DVDW SH-S162L, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
<4>Attempting manual resume
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on hda7, internal journal
<6>EXT3-fs: mounted filesystem with journal data mode.
<6>parport0: PC-style at 0x378 [PCSPP]
<6>parport0: Printer, HEWLETT-PACKARD DESKJET 930C
<6>lp0: using parport0 (polling).
<6>gameport: EMU10K1 is pci0000:00:0e.1/gameport0, io 0xb400, speed 1172kHz
<7>ieee1394: Initialized config rom entry `ip1394'
<6>GSI 18 sharing vector 0xB9 and IRQ 18
<6>ACPI: PCI Interrupt 0000:00:0e.2[b] -> GSI 16 (level, low) -> IRQ 185
<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[f9c00000-f9c007ff] Max Packet=[2048] IR/IT contexts=[4/8]
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>GSI 19 sharing vector 0xC1 and IRQ 19
<6>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 193
<4>sk98lin: Asus mainboard with buggy VPD? Correcting data.
<4>eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
<4> PrefPort:A RlmtMode:Check Link State
<6>USB Universal Host Controller Interface driver v3.0
<6>GSI 20 sharing vector 0xC9 and IRQ 20
<6>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 201
<6>PCI: VIA IRQ fixup for 0000:00:10.0, from 11 to 9
<6>uhci_hcd 0000:00:10.0: UHCI Host Controller
<6>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:10.0: irq 201, io base 0x0000d800
<6>usb usb1: new device found, idVendor=0000, idProduct=0000
<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: UHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
<6>usb usb1: SerialNumber: 0000:00:10.0
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>hdc: ATAPI 1X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.20
<6>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 201
<6>PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 9
<6>uhci_hcd 0000:00:10.1: UHCI Host Controller
<6>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:10.1: irq 201, io base 0x0000e000
<6>usb usb2: new device found, idVendor=0000, idProduct=0000
<6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:10.1
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
<6>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 201
<6>PCI: VIA IRQ fixup for 0000:00:10.4, from 5 to 9
<6>ehci_hcd 0000:00:10.4: EHCI Host Controller
<6>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 3
<6>ehci_hcd 0000:00:10.4: irq 201, io mem 0xf9e00000
<6>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb3: new device found, idVendor=0000, idProduct=0000
<6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: EHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.18.2-34-default ehci_hcd
<6>usb usb3: SerialNumber: 0000:00:10.4
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 8 ports detected
<6>GSI 21 sharing vector 0xD1 and IRQ 21
<6>ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 209
<6>ALSA sound/pci/emu10k1/emufx.c:1435: Installing spdif_bug patch: Audigy 2 ZS [SB0350]
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c01510e5510]
<6>ACPI: PCI Interrupt 0000:00:10.2[b] -> GSI 21 (level, low) -> IRQ 201
<6>PCI: VIA IRQ fixup for 0000:00:10.2, from 10 to 9
<6>uhci_hcd 0000:00:10.2: UHCI Host Controller
<6>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:10.2: irq 201, io base 0x0000e400
<6>usb usb4: new device found, idVendor=0000, idProduct=0000
<6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: UHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
<6>usb usb4: SerialNumber: 0000:00:10.2
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>ACPI: PCI Interrupt 0000:00:10.3[b] -> GSI 21 (level, low) -> IRQ 201
<6>PCI: VIA IRQ fixup for 0000:00:10.3, from 10 to 9
<6>usb 3-3: new high speed USB device using ehci_hcd and address 2
<6>uhci_hcd 0000:00:10.3: UHCI Host Controller
<6>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
<6>uhci_hcd 0000:00:10.3: irq 201, io base 0x0000e800
<6>usb usb5: new device found, idVendor=0000, idProduct=0000
<6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb5: Product: UHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
<6>usb usb5: SerialNumber: 0000:00:10.3
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 2 ports detected
<6>usb 3-3: new device found, idVendor=0ccd, idProduct=0038
<6>usb 3-3: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 3-3: Product: Cinergy T
<6>usb 3-3: Manufacturer: TerraTec GmbH
<6>usb 3-3: configuration #1 chosen from 1 choice
<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>usb 3-6: new high speed USB device using ehci_hcd and address 3
<6>usb 3-6: new device found, idVendor=148f, idProduct=2573
<6>usb 3-6: new device strings: Mfr=1, Product=2, SerialNumber=0
<6>usb 3-6: Product: 802.11 bg WLAN
<6>usb 3-6: Manufacturer: Ralink
<6>usb 3-6: configuration #1 chosen from 1 choice
<4>nvidia: module license 'NVIDIA' taints kernel.
<6>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 185
<4>NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9746 Fri Dec 15 10:19:35 PST 2006
<4>rtusb init ====>
<4>idVendor = 0x148f, idProduct = 0x2573
<6>usbcore: registered new driver rt73
<4>DVB: registering new adapter (TerraTec/qanu USB2.0 Highspeed DVB-T Receiver).
<6>input: TerraTec/qanu USB2.0 Highspeed DVB-T Receiver remote control as /class/input/input3
<6>usbcore: registered new driver cinergyT2
<6>Loading module: rt73usb - CVS (N/A) by http://rt2x00.serialmonkey.com/.
<6>usbcore: registered new driver rt73usb
<6>Loading module: rt2500usb - CVS (N/A) by http://rt2x00.serialmonkey.com/.
<6>usbcore: registered new driver rt2500usb
<4>rt73 driver version - 1.0.3.6 CVS
<6>***rt73***: Interface goes up for the first time, activating permanent MAC
<6>***rt73***: Active MAC is: 00:11:6b:39:e3:76.
<6>Adding 2104444k swap on /dev/sda5. Priority:-1 extents:1 across:2104444k
<6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
<6>loop: loaded (max 8 devices)
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on hda1, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on dm-0, internal journal
<6>EXT3-fs: mounted filesystem with journal data mode.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on hda5, internal journal
<6>EXT3-fs: mounted filesystem with journal data mode.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on hda6, internal journal
<6>EXT3-fs: mounted filesystem with journal data mode.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda6, internal journal
<6>EXT3-fs: mounted filesystem with journal data mode.
<6>AppArmor: AppArmor initialized
<5>audit(1173199786.101:2): AppArmor initialized
<4>
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Tue Mar 6 16:49:19 2007

Trying manual resume from /dev/sda5
Creating device nodes with udev
Loading ide-core
Loading ide-disk
Loading scsi_mod
Loading sd_mod
Loading processor
Loading thermal
Loading libata
Loading sata_promise
Loading sata_via
Loading via82cxxx
Loading fan
Loading edd
Loading jbd
Loading mbcache
Loading ext3
Invoking userspace resume from /dev/sda5
resume: Could not stat configuration file
resume: libgcrypt version: 1.2.3
resume: Could not read the image
Invoking in-kernel resume from /dev/sda5
Waiting for device /dev/hda7 to appear: ok
fsck 1.39 (29-May-2006)
[/bin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/hda7
/dev/hda7: clean, 65794/656000 files, 424795/1311297 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/hda7

Boot logging started on /dev/tty1(/dev/console (deleted)) at Tue Mar 6 16:49:27 2007

<notice>boot.open-iscsi start
<notice>'boot.open-iscsi start' exits with status 7
<notice>boot.udev start
Starting udevd udevd-event[1865]: run_program: exec of program '/usr/sbin/alsactl' failed

done
<notice>'boot.udev start' exits with status 0
<notice>boot.rootfsck start
Activating swap-devices in /etc/fstab...
done<notice>'boot.rootfsck start' exits with status 0
<notice>boot.loadmodules start
Loading required kernel modules
done<notice>'boot.loadmodules start' exits with status 0
<notice>boot.preload_early start
done
<notice>'boot.preload_early start' exits with status 0
<notice>boot.scpm start
<notice>'boot.scpm start' exits with status 0
<notice>boot.device-mapper start
Activating device mapper...
done
<notice>'boot.device-mapper start' exits with status 0
<notice>boot.md start
Starting MD Raid done
<notice>'boot.md start' exits with status 0
<notice>boot.lvm start
Waiting for udev to settle...
Scanning for LVM volume groups...
Reading all physical volumes. This may take a while...
Found volume group "Daten" using metadata type lvm2
Activating LVM volume groups...
1 logical volume(s) in volume group "Daten" now active
done
<notice>'boot.lvm start' exits with status 0
<notice>boot.localfs start
Checking file systems...
fsck 1.39 (29-May-2006)
/dev/hda1: clean, 49/26104 files, 26094/104388 blocks
/dev/hda5: clean, 19/131616 files, 12673/263056 blocks
/dev/Daten/home: clean, 110917/75677696 files, 39882410/151335936 blocks
/dev/hda6: clean, 143010/1311552 files, 1698027/2622603 blocks
/dev/sda6: clean, 5920/1311552 files, 203815/2622603 blocks
donedone
Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda1 on /boot type ext3 (rw,acl,user_xattr)
/dev/mapper/Daten-home on /home type ext3 (rw,data=journal,acl,user_xattr)
/dev/hda5 on /tmp type ext3 (rw,data=journal,acl,user_xattr)
/dev/hda6 on /usr type ext3 (rw,data=journal,acl,user_xattr)
/dev/sda6 on /var type ext3 (rw,data=journal,acl,user_xattr)
done<notice>'boot.localfs start' exits with status 0
<notice>boot.apparmor start
Loading AppArmor module done
Mounting securityfs on /sys/kernel/security done
Loading AppArmor profiles done
<notice>'boot.apparmor start' exits with status 0
<notice>boot.cleanup start
Cleaning temporary directories /tmpdone
<notice>'boot.cleanup start' exits with status 0
<notice>boot.clock start
Setting up the hardware clockdone
<notice>'boot.clock start' exits with status 0
<notice>boot.cycle start
<notice>'boot.cycle start' exits with status 6
<notice>boot.klog start
Creating /var/log/boot.msg
done<notice>killproc: kill(907,29)
<notice>'boot.klog start' exits with status 0
<notice>boot.proc start
<notice>'boot.proc start' exits with status 0
<notice>boot.sysctl start
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
<notice>'boot.sysctl start' exits with status 0
<notice>boot.udev_retry start
Retry device configurationdone
<notice>'boot.udev_retry start' exits with status 0
<notice>boot.videobios start
<notice>'boot.videobios start' exits with status 0
<notice>boot.crypto start
<notice>'boot.crypto start' exits with status 0
<notice>boot.ipconfig start
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
<notice>'boot.ipconfig start' exits with status 0
<notice>boot.localnet start
Setting up hostname 'linux-xy5r'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
<notice>'boot.localnet start' exits with status 0
<notice>boot.preload start
done
<notice>'boot.preload start' exits with status 0
<notice>boot.swap start
Activating remaining swap-devices in /etc/fstab...
done<notice>'boot.swap start' exits with status 0
<notice>SuSEfirewall2_init start
Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
<notice>'SuSEfirewall2_init start' exits with status 0
<notice>boot.ldconfig start
<notice>'boot.ldconfig start' exits with status 0
System Boot Control: The system has been set up
Failed features: boot.open-iscsi
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(907,3)

INIT:
Boot logging started on /dev/tty1(/dev/console) at Tue Mar 6 16:49:59 2007

Master Resource Control: previous runlevel: N, switching to runlevel: 5
Entering runlevel: 5


<notice>startproc: execve (/sbin/acpid) [ /sbin/acpidLoading AppArmor profiles - AppArmor already loaded with profiles.skipped
], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/acpid ]
done
[acpid]: starting up


[acpid]: 0 rules loaded


<notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
acpid: loading ACPI modules ( ac battery button ) done
acpid: will not skip unsupported modules
acpid: loading ACPI laptop modules ( ) done
Starting acpid done
<notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/klogd ]
Starting syslog servicesdone
Starting D-Bus daemonUnknown group "netdev" in message bus configuration file
done
Starting irqbalance unused
Initializing random number generatordone
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
<notice>startproc: execve (/usr/sbin/polkitd) [ /usr/sbin/polkitd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/polkitd ]
Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial G0:loadable
doneStarting PolicyKit daemondone
<notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
Starting HAL daemondone
Loading CPUFreq modules (CPUFreq not supported)
<notice>startproc: execve (/usr/sbin/dhcdbd) [ /usr/sbin/dhcdbd --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/dhcdbd ]
<notice>startproc: execve (/usr/sbin/NetworkManagerDispatcher) [ /usr/sbin/NetworkManagerDispatcher ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManagerDispatcher ]
<notice>startproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ]
Starting the DHCP DBUS Daemondone
Starting the NetworkManagerDispatcherdone
Starting the NetworkManagerdone
<notice>startproc: execve (/usr/sbin/isdngw) [ /usr/sbin/isdngw -d -p /var/run/isdngw.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/isdngw ]
<notice>startproc: execve (/sbin/auditd) [ /sbin/auditd -n ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/auditd ]
Starting service isdngw (H.323 - ISDN gateway)done
Starting auditd done
<notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/nmbd ]
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting Samba NMB daemon done
Starting RPC portmap daemondone
Importing Net File System (NFS)unused
Starting nfsboot (sm-notify) done
Checking/updating CPU microcode unused
Starting ZENworks Management Daemondone
Daemon started with pid 3406
<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ]
Starting powersaved: done
<notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/lib/ntp/var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
Starting service kdmdone
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
Try to get initial date and time via NTP from de.pool.ntp.orgError : Temporary failure in name resolution
failed
Starting network time protocol daemon (NTPD)done
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting cupsddone
Starting Name Service Cache Daemondone
Starting mail service (Postfix)done
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
Starting Samba SMB daemon <notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 TMPDIR=/var/tmp LC_ALL= INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg LANG=de_DE.UTF-8 PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 LC_CTYPE= splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/smbd ]
done
Mount CIFS File Systems unused
Starting SMPPPD<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
done
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hda7 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting SSH daemondone
<notice>checkproc: /opt/kde3/bin/kdm 3426
Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
done
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: irq_balancer nfs microcode smbfs
<notice>killproc: kill(2661,3)


Wenn ich was machen, werd ich es tun.

GrussL

Och nöh, boot.msg ist nicht das, was ich suche.

Du sollst selbst mal schauen, ob du das Wort NetworkManager in der Datei /var/log/messages findest. So schwer kann es doch gar nicht sein, die Meldungen zu verstehen.

Vor allem, bei solchen Fehlersuchaktionen muß immer eine Konsole mitlaufen, in der du den Befehl tail -f /var/log/messages laufen läßt. Wenn du dann den Stick abziehst und aufsteckst. siehst du doch unmittelbar, was passiert.

Wenn da dann error steht, ist eben was schief gelaufen.

Mit 600 Zeilen boot.msg fange ich jedenfalls nicht viel an und ein gewisses Maß an Mitarbeit, das ein wenig darüber hinaus geht, hunderte von Zeilen von Protokoll hier rein zu werfen und "und nun?" hinter zu schreiben, erwarte ich dann doch.

Also, wir sind soweit, daß die Funkverbindung steht (ist ja mit iwconfig bewiesen).

Wir haben aber keine IP-Adresse für rausb0, das heißt, daß die Netzwerkschnittstelle rausb0 ohne DHCP konfiguriert ist. Ich hoffe auch zu wissen, daß sich in deinem bzw. SuSEs Fall der NetworkManager um das Netzwerk kümmert, das hoffte ich, in /var/log/messages zu erfahren. Dieser ominöse NetworkManager ist ein Stück Software, das gerne von neueren Linuxdistributionen eingesetzt wird und dem Nutzer die Konfiguration erleichtern soll.

Wie es mit dem Networkmanager aber weiter geht, weiß ich leider nicht. Ich kenne das Ding nicht. Ruf halt den NetworkManager mal auf (wie? keine Ahnung ) und stell dort rausb0 auf "IP-Adresse automatisch beziehen" ein (sollte es den Punkt nicht geben, so heißt er vielleicht DHCP).

ein grosses SORRY, war ein kleines Missverständnis.

Hier die Meldung (hoffe diesmal korrekt) beim ab und wieder drauf ziehen des Sticks:

Mar 6 20:50:16 linux-xy5r gconfd (ulrich-4412): Beenden
Mar 6 20:50:20 linux-xy5r su: (to root) ulrich on /dev/pts/1
Mar 6 20:51:05 linux-xy5r kernel: usb 3-6: USB disconnect, address 3
Mar 6 20:51:05 linux-xy5r kernel: unregister_netdev()
Mar 6 20:51:05 linux-xy5r ifdown: rausb0
Mar 6 20:51:07 linux-xy5r ifdown-bridge: bride-utils not installed
Mar 6 20:51:23 linux-xy5r kernel: usb 3-6: new high speed USB device using ehci _hcd and address 4
Mar 6 20:51:24 linux-xy5r kernel: usb 3-6: new device found, idVendor=148f, idP roduct=2573
Mar 6 20:51:24 linux-xy5r kernel: usb 3-6: new device strings: Mfr=1, Product=2 , SerialNumber=0
Mar 6 20:51:24 linux-xy5r kernel: usb 3-6: Product: 802.11 bg WLAN
Mar 6 20:51:24 linux-xy5r kernel: usb 3-6: Manufacturer: Ralink
Mar 6 20:51:24 linux-xy5r kernel: usb 3-6: configuration #1 chosen from 1 choic e
Mar 6 20:51:24 linux-xy5r kernel: idVendor = 0x148f, idProduct = 0x2573
Mar 6 20:51:24 linux-xy5r kernel: rt73 driver version - 1.0.3.6 CVS
Mar 6 20:51:24 linux-xy5r kernel: ***rt73***: Interface goes up for the first t ime, activating permanent MAC
Mar 6 20:51:24 linux-xy5r kernel: ***rt73***: Active MAC is: 00:11:6b:39:e3:76.
Mar 6 20:51:35 linux-xy5r ifup: Network interface is managed from NetworkManager
Mar 6 20:51:35 linux-xy5r ifup: NetworkManager will be advised to set up rausb0
Mar 6 20:51:35 linux-xy5r ifup: but it cannot be assured from here.


Zum Networkmanager, den kenn ich auch erst seit kurzem. Untern in der Menüleiste kann man ihn leider nicht einrichten. Müsste mal schauen, ob man ihn in der konsole einrichten kann.


Noch was wenn ich lsmod aufrufe, wird auch der treiber rt2500 geladen, kann es sein, dass das er mit dem rt73 in konkurrenz steht? Im Yast wird der rt73 angezeigt.
GrussL