# # this is a shift encoded remote control from philips # # contributed by # # based upon the config-file for the # Philips RD6835 for CD-player # contributed by # # brand: Philips # model: RD 5862 # supported devices: CD-player # # Comments: # # The RD 5862 does not have a "scan" button, but the config-file will # also work with other Philips CD-player remotes which might have it begin remote name PHILIPS_CD bits 6 flags SHIFT_ENC|CONST_LENGTH eps 20 aeps 0 one 940 840 zero 940 840 ptrail 0 plead 940 pre_data_bits 7 pre_data 0x54 gap 115200 repeat_bit 2 begin codes 0 0x0000000000000000 1 0x0000000000000001 2 0x0000000000000002 3 0x0000000000000003 4 0x0000000000000004 5 0x0000000000000005 6 0x0000000000000006 7 0x0000000000000007 8 0x0000000000000008 9 0x0000000000000009 SCAN 0x000000000000002B OPEN/CLOSE 0x000000000000002D REPEAT 0x000000000000001D PAUSE 0x0000000000000030 RANDOM 0x000000000000001C NEXT_TRACK 0x0000000000000020 PREV_TRACK 0x0000000000000021 PLAY 0x0000000000000035 STOP 0x0000000000000036 DIRECT_PR/PLAY 0x0000000000000024 NEXT_INDEX 0x0000000000000022 PREV_INDEX 0x0000000000000023 SEARCH_BACKW 0x0000000000000032 SEARCH_FORW 0x0000000000000034 FAST 0x000000000000002F A/B 0x000000000000003B TIME 0x000000000000000B REVIEW 0x000000000000000F C 0x0000000000000031 S 0x0000000000000029 end codes end remote begin remote name PHILIPS_LV2 bits 6 flags SHIFT_ENC|CONST_LENGTH eps 20 aeps 0 one 940 840 zero 940 840 ptrail 0 plead 940 pre_data_bits 7 pre_data 0x14 gap 115200 repeat_bit 2 begin codes FTS 0x000000000000002c end codes end remote